Ask for a quote

Tell us what you are looking for and we will get back to you with a price.

* required field

Training Benches

Training Benches

El Eslèk positions itself as a leading player in the deployment of cutting-edge educational solutions dedicated to technical and university-level education. In close collaboration with a network of strategic partners, we design and implement innovative learning ecosystems, including advanced educational systems, turnkey practical training laboratories, specialized training centers, and tailor-made training programs.

Driven by a vision centered on excellence and innovation, our mission is to contribute to the development of highly qualified professionals capable of operating efficiently and agilely in complex, rapidly evolving technological environments.

Training Benches

Active filters

FXB-A12003 Automotive Starting and Charging System Training Bench



Logo FXB Co. Ltd




Reference : FXB-A12003FXB-A12003 Automotive Starting and Charging System Training Panel




The FXB-A12003 is a training panel designed to demonstrate the starting and charging systems of Volkswagen vehicles, based on the Volkswagen Magotan architecture. It enables trainees to understand the operating principles of the starter motor, alternator, and 12 V battery while performing electrical measurements and practical diagnostic exercises. Equipped with test terminals and a wireless fault simulation and assessment system, it is suitable for technical education and vocational training in automotive maintenance.



Training Applications

The FXB-A12003 training panel is suitable for vocational training centers, technical institutes, and educational establishments specializing in automotive maintenance. It supports practical training in the following areas:

  • Studying the architecture and operation of automotive starting systems;
  • Understanding battery charging system operation;
  • Performing electrical measurements on circuits and components;
  • Practicing electrical fault diagnosis;
  • Developing automotive maintenance and troubleshooting skills.



FXB-XXH054 Automotive Multiplex Network and Diagnostics Training Bench



Logo FXB Co. Ltd




Reference : FXB-XXH054 Automotive Multiplex Network and Diagnostics Training Bench




The FXB-XXH054 is a training bench designed for the study, simulation, and diagnosis of automotive multiplex communication networks, including CAN and LIN, with optional FlexRay support. It enables trainees to analyze data exchange between electronic control units, visualize communication frames in real time, and simulate various electrical and electronic faults. Equipped with OBD-II diagnostic connectors, measurement terminals, and a network schematic display, it is suitable for vocational training in automotive electronics and diagnostics.



Training Applications

The FXB-XXH054 is intended for vocational training centers, technical institutes, automotive training facilities, and laboratories specializing in automotive electronics. It helps develop practical skills in multiplex communication networks, automotive electronics, and onboard system diagnostics.



FXB-XXH055 Automotive Multiplexing and CAN-BUS Simulation Training Bench



Logo FXB Co. Ltd




Référence : FXB-XXH055 Banc didactique de multiplexage automobile et de simulation CAN-BUS




FXB-XXH055 Automotive Multiplexing and CAN-BUS Simulation Training Bench

The FXB-XXH055 is a training bench designed for studying automotive multiplexing and CAN-BUS communication using functional, genuine automotive components. It enables trainees to examine data exchange between different vehicle electronic systems, including engine management, the instrument cluster, lighting, and diagnostics. Equipped with functional modules, wiring assemblies, and automotive lighting components, it provides a practical training platform for onboard electronics, automotive network architecture, and electrical diagnostics.



Training Applications

The FXB-XXH055 is suitable for vocational training centers, technical institutes, and educational facilities specializing in automotive maintenance and onboard electronics.

It supports practical training in the following areas:

  • Studying automotive multiplexing principles;
  • Understanding CAN-BUS network architecture and operation;
  • Analyzing data exchange between different electronic modules;
  • Studying electronically controlled automotive lighting systems;
  • Identifying electrical system components and interconnections;
  • Understanding interactions between engine management, the instrument cluster, and diagnostic functions;
  • Performing practical exercises involving automotive electrical circuits and electronic systems.



FXB-A01013 Multi-Point Fuel Injection Gasoline Engine Training Bench



Logo FXB Co. Ltd




Reference : FXB-A01013 Multi-Point Fuel Injection Gasoline Engine Training Bench




The FXB-A01013 training bench is based on an electronically controlled gasoline engine of the Volkswagen Jetta EA211 type. It is designed to demonstrate the structure, operating principles and control systems of a modern four-cylinder, inline, four-stroke gasoline engine featuring water cooling and variable valve timing.

Designed for technical schools, vocational training centers and automotive training institutions, this equipment supports practical exercises in electronic fuel injection, ignition systems, engine management, electronic diagnostics and fault troubleshooting.



Educational Applications

  • Study of the architecture and operation of a multi-point fuel injection gasoline engine.
  • Analysis of electronic ignition and fuel injection control systems.
  • Study of sensors and actuators used in engine management systems.
  • Measurement and interpretation of engine control unit electrical signals.
  • Use of automotive diagnostic tools to read fault codes and analyze engine data.
  • Fault finding, electronic diagnostics and maintenance of engine management systems.
  • Practical training in automotive mechanics and embedded automotive electronics.



FXB-A01014 Direct-Injection Gasoline Engine Training Bench



Logo FXB Co. Ltd




Référence : FXB-A01014 Direct-Injection Gasoline Engine Training Bench




The FXB-A01014 training bench is an educational system designed to study and diagnose electronically controlled direct-injection gasoline engines. Based on the EA211 1.4 T engine, it allows users to simulate different engine operating conditions and analyze the parameters of its control systems.

Designed for technical schools, vocational training centers, and automotive maintenance training institutions, this equipment supports hands-on learning in modern gasoline engine operation, electronic diagnostics, and fault-finding procedures.



Training Applications

The FXB-A01014 training bench is suitable for practical training in the following areas:

  • Study of direct-injection gasoline engine operation.
  • Analysis of electronic engine management systems.
  • Identification and study of sensors and actuators.
  • Electrical parameter measurement and signal analysis.
  • Use of automotive diagnostic scanners.
  • Reading, interpreting, and clearing diagnostic trouble codes.
  • Fault-finding exercises and practical skills assessment.



FXB-A18005 Common Rail Diesel Engine Training Bench



Logo FXB Co. Ltd




Référence : FXB-A18005 Common Rail Diesel Engine Training Bench




Common Rail Diesel Engine Training Bench – FXB-A18005

The FXB-A18005 training bench is designed for studying the operation, diagnostics, and maintenance of electronically controlled high-pressure Common Rail diesel engines. Based on an engine from a Great Wall Pickup vehicle, it enables trainees to simulate different engine operating conditions and investigate electronic engine management, fuel injection, and turbocharging systems.

Equipped with measurement terminals, an automotive diagnostic interface, and a wireless fault simulation system, this training bench is suitable for technical schools, vocational training centers, and institutions specializing in automotive maintenance.



Training Applications

  • Training on the operation of Common Rail diesel engines.
  • Study of electronic engine management systems.
  • Practical training in electrical measurements and signal analysis.
  • Electronic diagnostics and diagnostic trouble code reading.
  • Fault identification and troubleshooting procedures.
  • Practical maintenance training for modern diesel engines.



FXB-A17002 Electronically Controlled Diesel Engine Training Bench



Logo FXB Co. Ltd




Référence : FXB-A17002 Electronically Controlled Diesel Engine Training Bench




The FXB-A17002 training bench is designed for practical training in the operation, diagnostics, and maintenance of electronically controlled diesel engines. Based on a 4.76-liter turbocharged diesel engine with four inline cylinders and a four-stroke operating cycle, it enables trainees to study fuel injection, electronic engine management, and exhaust gas treatment systems.

Equipped with electrical measurement terminals, an automotive diagnostic interface, and an intelligent fault simulation and assessment system, this training bench is suitable for technical schools, specialized institutes, and vocational training centers providing automotive maintenance education.



Training Applications

  • Study of electronically controlled diesel engine operation.
  • Training in diesel fuel injection and engine management systems.
  • Electrical signal analysis for sensors and actuators.
  • Electronic diagnostics and diagnostic trouble code reading.
  • Study of exhaust gas recirculation and exhaust after-treatment systems.
  • Fault-finding and troubleshooting exercises.
  • Practical maintenance training for turbocharged diesel engines.



FXB-A17003 Euro 6 Diesel Engine Training Bench



Logo FXB Co. Ltd




Référence : FXB-A17003 Euro 6 Diesel Engine Training Bench




The FXB-A17003 training bench is designed for practical training in the operation, diagnostics, and maintenance of turbocharged diesel engines incorporating Euro 6 emissions-control technologies. Based on a four-stroke, four-cylinder inline engine with a maximum displacement of 2,000 cc, it enables trainees to study electronic engine management and exhaust after-treatment systems.

Equipped with electrical measurement terminals, an OBD-II diagnostic interface, and an intelligent fault simulation and assessment system, this training bench is suitable for technical schools, specialized institutes, and vocational training centers providing automotive mechanics and diagnostic training.



Training Applications

  • Study of electronically controlled turbocharged diesel engines.
  • Training in electronic diagnostics and engine signal analysis.
  • Study of sensors, actuators, and engine management strategies.
  • Understanding EGR, DPF, and SCR systems.
  • Analysis of exhaust emissions-reduction technologies.
  • Practical fault-finding and troubleshooting exercises.
  • Training in the maintenance of modern diesel engines and their emissions-control systems.



FXB-B01007 All-Wheel-Drive Automatic Transmission and Differential Training Bench



Logo FXB Co. Ltd




Référence : FXB-B01007 All-Wheel-Drive Automatic Transmission and Differential Training Bench




The FXB-B01007 training bench is designed for practical instruction in the operating principles of all-wheel-drive (AWD) automatic transmission systems. Featuring a cutaway automatic transmission and differential, it enables learners to observe key mechanical components and understand their operation, including the torque converter, planetary gear sets, clutch discs, and gear-shifting mechanisms.

Equipped with an electric motor for dynamic operation, a gear selector lever, and an instructional panel displaying mechanical and hydraulic diagrams, this training bench is suitable for vocational training centres, technical institutes, engineering schools, and automotive training laboratories.



Educational Applications

This training bench is intended for practical exercises and demonstrations in automotive mechanics, automatic transmissions, all-wheel-drive systems, and vehicle maintenance. It is suitable for vocational training centres, technical institutes, engineering schools, and specialised automotive technology laboratories.



FXB-B08004 AWD CVT Transmission Cutaway Training Model



Logo FXB Co. Ltd




Reference : FXB-B08004 AWD CVT Transmission Cutaway Training Model




The FXB-B08004 training model is designed to demonstrate and explain the operating principles of a continuously variable transmission (CVT) integrated into an all-wheel-drive (AWD) system. Its cutaway components provide a clear view of the main internal mechanisms and help learners understand how the transmission ratio varies continuously.

The model supports the study of the input shaft, planetary gear set, clutch mechanism, and ratio variation through the movement of conical pulleys. It is suitable for vocational training centres, technical institutes, engineering schools, and specialised automotive technology laboratories.



Educational Objectives

The training model enables learners to:

  • Understand the fundamental operating principles of a continuously variable transmission.
  • Observe the mechanisms involved in transmission ratio variation.
  • Identify the main mechanical components of a CVT transmission.
  • Study the functions of the input shaft, planetary gear set, and clutch mechanism.
  • Understand the general operation of a CVT transmission integrated into an all-wheel-drive architecture.



FXB-B01017 Automated Dry Dual-Clutch Transmission Training Bench (DSG)



Logo FXB Co. Ltd




Reference : FXB-B01017 Automated Dry Dual-Clutch Transmission Training Bench




The FXB-B01017 training bench is designed for practical instruction in automated manual transmissions equipped with a dry dual-clutch system. Based on a real, operational automotive transmission, it enables learners to study the mechanical structure, clutch and gear-shifting actuators, and electronic transmission control principles.

Driven by an adjustable-speed three-phase electric motor, the bench supports demonstrations of selector positions, starting in neutral, gear changes, and reverse operation. It also incorporates measurement terminals, a diagnostic interface, display instruments, and an educational fault simulation and assessment system.



Educational Applications

This training bench is suitable for vocational training centres, technical education institutions, specialised training institutes, and engineering schools offering courses in automotive mechanics, automated transmissions, onboard electronic systems, and vehicle diagnostics.



FXB-B01008 Electronic Automatic Transmission Training Bench



Logo FXB Co. Ltd




Reference : FXB-B01008 Electronic Automatic Transmission Training Bench




The FXB-B01008 training bench is designed for the practical study of electronically controlled automatic transmissions, including their operation, maintenance, testing, and diagnosis. Based on a functional cutaway automotive transmission corresponding to the Volkswagen 01M architecture, it enables trainees to observe key mechanical and hydraulic components, analyse electrical signals, and study transmission control strategies.

Equipped with an adjustable-speed electric motor, measurement terminals, operating parameter indicators, and a diagnostic interface, this training bench is suitable for technical education institutions, vocational training centres, and automotive technology laboratories.



Training Topics

  • Transmission operation and gear-shifting sequences.
  • Planetary gear set design and operation.
  • Function of clutch discs and friction components.
  • Differential operating principles, where included in the supplied configuration.
  • Relationship between transmission ratios and output speed.
  • Interaction between mechanical, hydraulic, and electronic systems.
  • Signal measurement, fault diagnosis, and troubleshooting.



FXB-B06004 Manual Transmission and Clutch Training Bench



Logo FXB Co. Ltd




Reference : FXB-B06004 Manual Transmission and Clutch Training Bench




The FXB-B06004 training bench is designed for studying and demonstrating the operation of a manual gearbox combined with a mechanical clutch. Based on an automotive architecture associated with the Volkswagen Jetta, it enables trainees to observe internal transmission components and understand the principles of gear selection, synchronisation, and torque transmission.

Featuring a cutaway gearbox, a complete clutch assembly, and an electric drive for dynamic demonstrations, this training equipment is suitable for technical education institutions, vocational training centres, and automotive technology laboratories.



Training Topics

  • Construction and operation of a manual gearbox.
  • Function and operating principles of a mechanical clutch.
  • Gear mechanisms and torque transmission.
  • Gear selection and engagement principles.
  • Synchroniser operation.
  • Interaction between the clutch, gearbox, and transmission components.



FXB-B04006 Cutaway Automotive Differential Training Model



Logo FXB Co. Ltd




Reference : FXB-B04006 Cutaway Automotive Differential Training Model




The FXB-B04006 educational model is designed for studying and demonstrating the operation of an automotive differential. Its cutaway construction provides a clear view of the internal gears and helps trainees understand the principles of motion distribution between the output shafts, particularly when the driven wheels rotate at different speeds.

Suitable for automotive mechanics and technology training, this educational equipment supports the study of transmission mechanisms, the function of planetary and side gears, and the role of the differential in an automotive drivetrain.



Training Topics

  • Structure and internal components of an automotive differential.
  • Principles of motion and torque transmission.
  • Operation of planetary and side gears.
  • Kinematic relationship between the output shafts.
  • Rotational speed differences between driven wheels.
  • Role of the differential in an automotive drivetrain, particularly when cornering.



FXB-A09002 Pencil Coil Ignition System Training Panel



Logo FXB Co. Ltd




Reference : FXB-A09002 Pencil Coil Ignition System Training Panel




Reference Vehicle Model: Volkswagen Passat

The FXB-A09002 training panel is designed to demonstrate the operation of an automotive pencil-coil ignition system using real components. Suitable for theoretical instruction and practical training, it helps learners study system architecture, analyze electrical signals, examine ignition timing and develop fault-diagnosis skills.



Training Configuration

  • Functional ignition system using genuine pencil-type ignition coils.
  • Individual pencil-coil ignition system.
  • Ignition and starter switch.
  • Adjustable rotary drive mechanism.
  • Top Dead Centre (TDC) sensor.
  • Variable ignition timing demonstration using a stroboscopic timing light.
  • Fault-diagnosis functions.



FXB-A09003 Twin Static Coil Ignition System Training Panel



Logo FXB Co. Ltd




Reference : FXB-A09003 Twin Static Coil Ignition System Training Panel




Reference Vehicle Model: Volkswagen

The FXB-A09003 training panel is designed to demonstrate and study the operation of an electronic ignition system using a twin static ignition coil. Equipped with real, functional components, it enables learners to analyze the ignition circuit, perform electrical measurements, observe ignition timing variations and practise fault diagnosis. It is suitable for technical education institutions, vocational training centres and automotive maintenance laboratories.



Training Configuration

  • Functional ignition system using a twin static ignition coil.
  • High-voltage ignition leads.
  • Four spark plugs.
  • Adjustable-speed drive mechanism for the crankshaft sensor disc.
  • Ignition and starter switch.
  • Top Dead Centre (TDC) sensor.
  • Ignition timing variation demonstration using a stroboscopic timing light.
  • Fault simulation and diagnostic functions.



FXB-A09004 Hall Effect Ignition System Training Panel



Logo FXB Co. Ltd




Reference : FXB-A09004 Hall Effect Ignition System Training Panel




Reference Vehicle Model: Volkswagen Jetta

The FXB-A09004 training panel is designed to demonstrate and study the operation of an automotive ignition system using a Hall effect sensor. Equipped with real, functional components, it enables learners to analyze the ignition circuit, understand the roles of the distributor and ignition module, perform electrical measurements and practise fault diagnosis. It is suitable for technical education institutions, vocational training centres and automotive maintenance laboratories.



Training Configuration

  • Ignition distributor equipped with a Hall effect sensor.
  • Ignition coil.
  • Electronic ignition module.
  • High-voltage ignition leads.
  • Four spark plugs.
  • Rotary drive mechanism.
  • Ignition timing variation demonstration using a stroboscopic timing light.
  • Fault simulation and diagnostic functions.



FXB-A09005 Breaker-Point Ignition System Training Panel



Logo FXB Co. Ltd




Reference : FXB-A09005 Breaker-Point Ignition System Training Panel




The FXB-A09005 is an educational training panel designed to demonstrate the operation and maintenance of conventional automotive breaker-point ignition systems. Using real, functional components, it enables learners to understand ignition system architecture, perform electrical measurements, study ignition timing and carry out fault-diagnosis exercises.

Designed for technical schools, vocational training centers and automotive training laboratories, this equipment provides a practical learning platform that combines theoretical instruction with hands-on activities. The reference vehicle model is the BJ212.



Basic Configuration

  • Breaker-point ignition distributor
  • Ignition coil
  • Ballast resistor
  • Ignition leads
  • Four spark plugs
  • Adjustable rotary drive mechanism
  • Facility for observing ignition timing variation using a stroboscopic lamp
  • Practical wiring arrangement for the individual components
  • Fault simulation and diagnostic system



FXB-I12008 Automotive Lighting and Ignition System Training Panel



Logo FXB Co. Ltd




Reference : FXB-I12008 Automotive Lighting and Ignition System Training Panel




The FXB-I12008 is an educational training panel designed for the practical study of automotive exterior lighting and ignition systems, based on the Volkswagen Passat B5 configuration. It enables learners to understand circuit architecture, lighting operation, electrical controls and the main components of the ignition system.

Featuring functional components, electrical measurement terminals and a fault simulation system, this equipment provides a practical training solution for technical schools, vocational training centers and automotive maintenance laboratories.



Basic Configuration

  • Headlights
  • Turn signals and brake lights
  • Control panel
  • Relays and main switch
  • Alternator driven by a variable-speed electric motor with a frequency converter to demonstrate battery charging
  • Ignition system, including an ignition coil and spark plugs
  • Measurement terminals and fault simulation system
  • Mobile metal frame with integrated worktop



FXB-A12008 Automotive Starting System Training Panel



Logo FXB Co. Ltd




Reference : FXB-A12008 Automotive Starting System Training Panel




The FXB-A12008 is an educational training panel designed for the practical study of automotive starting systems, based on the Volkswagen Jetta configuration. It enables learners to understand starter motor operation, associated electrical circuits and the main stages involved in cranking an engine.

Featuring real components, an ammeter, a voltmeter and electrical measurement terminals, this equipment supports practical training in inspection and troubleshooting procedures. Its fault simulation system makes it suitable for technical schools, vocational training centers and automotive maintenance laboratories.



Basic Configuration

  • Set of real automotive components
  • Starter motor
  • Alternator
  • Braking or mechanical loading device compatible with the starter, according to the manufacturer's configuration
  • Ammeter
  • Voltmeter
  • Electric motor for driving the alternator during testing
  • Electrical measurement terminals
  • Fault simulation system



FXB-G03001 Automotive Chassis Systems Cutaway Training Model



Logo FXB Co. Ltd




Reference : FXB-G03001 Automotive Chassis Systems Cutaway Training Model




The FXB-G03001 is a comprehensive automotive chassis training model based on the Toyota Hiace. It is designed to demonstrate the layout and operation of major vehicle systems, including the internal combustion engine, transmission, drive shafts, rear axle, steering, braking, suspension, and lighting systems. Its cutaway components and adjustable-speed electric drive allow trainees to observe internal mechanisms and understand the flow of mechanical power. The welded chassis is mounted on a stand with lockable castors and a manual tilt adjustment, providing improved access to components located underneath the vehicle.



Educational Applications

This training model supports the study of overall vehicle architecture, interactions between mechanical and electrical systems, drivetrain operation, and the arrangement of chassis components. It is suitable for classroom demonstrations, practical training sessions, and introductory automotive diagnostics and maintenance exercises.



FXB-I19003 Airbag and Seat Belt Retractor System Training Panel



Logo FXB Co. Ltd




Reference : FXB-I19003 Airbag and Seat Belt Retractor System Training Panel




The FXB-I19003 is an educational training panel designed to study automotive occupant restraint systems, particularly airbags and seat belt retractors. Based on an automotive restraint system architecture, it enables learners to examine the interaction between driver and passenger airbags, seat belts, the airbag control unit, and passenger presence detection sensors. Featuring a simulation system, electrical measurement terminals, an EOBD diagnostic interface, and a fault simulation system, it provides a comprehensive training solution for automotive safety, electronic diagnostics, and restraint system maintenance.



Educational Applications

The FXB-I19003 enables learners to study airbag system architecture, the role of seat belts and passenger presence sensors, electronic control principles, electrical measurement methods, and fault diagnosis procedures. It is suitable for practical training in automotive safety and the maintenance of electronic vehicle systems.



FXB-A21001 Common Rail Diesel Engine Electronic Control System Training Panel



Logo FXB Co. Ltd




Reference : FXB-A21001 Common Rail Diesel Engine Electronic Control System Training Panel




The FXB-A21001 training panel is designed for learning, studying and diagnosing electronic control systems used in Common Rail diesel engines. Based on a Bosch-type engine management architecture, it incorporates real components to demonstrate the operation of sensors, actuators, the engine control unit (ECU) and the high-pressure fuel injection circuit.

Equipped with measurement terminals, an OBD-II diagnostic interface and an intelligent fault-setting and assessment system, this training panel enables learners to develop practical skills in signal analysis, electronic diagnostics and fault finding. It is suitable for technical schools, vocational training centres and institutions specialising in automotive maintenance.



Educational Applications

  • Study of the architecture of an electronic Common Rail diesel engine management system.
  • Identification of sensors, actuators and control circuits.
  • Measurement and analysis of accessible electrical signals.
  • Introduction to electronic diagnostics using an OBD-II interface.
  • Fault-finding, troubleshooting and technical skills assessment exercises.



FXB-A05001 Gasoline-Electric Hybrid Powertrain Training Bench



Logo FXB Co. Ltd




Reference : FXB-A05001 Gasoline-Electric Hybrid Powertrain Training Bench




The FXB-A05001 training bench is based on a Toyota Corolla 1.8 L gasoline-electric hybrid powertrain. It enables students to understand the structure, operating principles, and control strategies of hybrid propulsion systems through practical demonstrations, electrical measurements, electronic diagnostics, and troubleshooting exercises.

Featuring a real, operational hybrid engine system, a measurement panel with test terminals, a diagnostic interface, and a tablet for fault configuration, this training bench is suitable for technical and vocational schools, automotive training institutions, and vehicle maintenance training centers.



Practical Training and Learning Objectives

  • Identify the main components of a gasoline-electric hybrid propulsion system and understand their functions.
  • Study hybrid system starting sequences and operating phases, including acceleration and deceleration.
  • Analyze the operation of sensors, actuators, and electronic control units.
  • Measure electrical signals using a suitable multimeter or oscilloscope.
  • Use a compatible diagnostic tool to read fault codes and monitor available operating parameters.
  • Clear fault codes when permitted by the diagnostic conditions.
  • Perform troubleshooting procedures using faults configured on the training bench.
  • Develop practical skills in electronic diagnostics and hybrid propulsion system maintenance.



FXB-A05001P Plug-in Hybrid Powertrain Training Bench



Logo FXB Co. Ltd




Référence : FXB-A05001P Plug-in Hybrid Powertrain Training Bench




The FXB-A05001P training bench is designed for hands-on training in gasoline-electric plug-in hybrid propulsion systems. Based on a 1.8 L Toyota Corolla plug-in hybrid configuration, it enables students to study the operation of the internal combustion engine, electric motors, high-voltage battery, inverter, and hybrid transmission system.

The equipment features a measurement panel with electrical diagrams and test terminals, an OBD-II diagnostic interface, an operational dashboard, and a wireless tablet-based fault simulation system providing at least 16 training faults. The included educational software combines technical explanations with 3D visualization of system components and energy flow under different vehicle operating conditions.



Main Features and Functions

  • Real plug-in hybrid system: Integrates the main components of a plug-in hybrid powertrain for practical study of their construction and operating principles.
  • Educational panel: Features durable, clearly legible color electrical and functional diagrams to facilitate component identification and understanding of system control principles.
  • Dashboard: Displays operating parameter variations, including vehicle speed, as well as oil pressure and electronic system fault warning indicators.
  • Electrical measurement terminals: Provide access to electrical signals from sensors, actuators, and control units for measurements using a multimeter or oscilloscope, depending on the available test points.
  • OBD-II electronic diagnostics: Includes a diagnostic connector for a compatible scan tool to read and clear fault codes and retrieve available data from the engine and hybrid control systems.
  • Acceleration control: Incorporates a throttle controller for simulating acceleration and deceleration within the operating limits of the training bench.
  • Safety devices: Includes a master power switch, protective covers for relevant cooling and mechanical components, and a safety disconnection device for the high-voltage battery.
  • Mobile frame: Mounted on a supporting frame with lockable casters for convenient relocation and secure positioning during practical exercises.
  • Training documentation: Includes a student and instructor manual covering equipment introduction, component identification, operating principles, operating procedures, fault configuration, and troubleshooting methods.



8140772 CIROS® 3D Simulation Software, Version 7



Festo Logo



References :

  • 8140772E : Education License
  • 8140772S : Studio License




CIROS® 7 is a professional 3D simulation platform designed for industrial automation, robotics and technical training. It enables users to design, simulate and validate automated systems, robotic workcells and production lines in a realistic virtual environment. With extensive model libraries, industrial interfaces and advanced programming capabilities, CIROS® 7 provides a comprehensive solution for education, research and the development of automation skills.

The "Studio" version includes advanced modelling and simulation tools, external controller integration, robot programming, fault simulation and the preparation of educational scenarios. The license allows permanent use of the version available at the time of purchase and includes updates for the following two years.



8106066 – IT Networks and Cybersecurity – TP 1333 Training System



Festo Logo



Reference :

  • 8106066 : TP 1333 - IT Networks and Cybersecurity




A modular training system designed for practical learning of modern networking technologies, industrial communication and cybersecurity. Equipped with Siemens S615 routers and XC208 switches, the TP 1333 enables hands-on exercises in network configuration, routing, communication security and troubleshooting. Suitable for different training environments, it supports up to two workstations and can be installed on a workbench or in an A4 mounting frame. A separate downloadable package includes the Festo NetLab Toolkit configuration software and a practical training manual.



Practical Training Topics

  • Networking Fundamentals: Understanding IP and MAC addressing, switching, routing and data packet flows.
  • Industrial Network Configuration: Configuring routers, switches and PLCs, IP addressing, VLANs, NAT and firewall rules.
  • Secure Communication: Configuring IPsec VPN connections and managing digital certificates.
  • Network Security Implementation: Setting up port security, firewall rules, access control and logging.
  • Network Traffic Analysis: Capturing and analyzing data packets, interpreting network exchanges and troubleshooting communication errors.



587336 – Motor Winding Kit (LabVolt Series 8020)



Festo Logo



Référence :

  • 587336 : Motor Winding Kit




The Motor Winding Kit provides a comprehensive educational solution for learning the manufacturing, winding and assembly techniques used in electrical machines. Starting from basic components such as magnetic laminations, motor end frames and magnet wire, students can construct several types of rotating electrical machines, including three-phase squirrel-cage induction motors, three-phase wound-rotor induction motors, three-phase synchronous machines and single-phase split-phase motors with starting capacitors.

This training kit offers a practical and progressive approach to electrical machine construction, from winding fabrication to mechanical assembly and commissioning. It includes the materials, tools, winding accessories and instructional resources required to repeatedly manufacture and assemble different machine configurations.



Training Content and Learning Objectives

The practical training manual describes the winding techniques, assembly procedures and operating principles of the machines constructed. It guides students through every stage, from familiarization with the components to the complete construction of electrical machines.

Main Training Topics

  • Identification of electrical machine components and understanding of their terminology.
  • Study of materials used in electrical machine manufacturing.
  • Learning electrical winding and mechanical assembly techniques.
  • Construction of a single-phase split-phase motor with a starting capacitor.
  • Winding of a three-phase stator with a lap winding configuration.
  • Construction of a three-phase wound rotor for an induction motor.
  • Winding of the DC field of a synchronous machine rotor.
  • Study of the operating principles, applications and characteristics of assembled electrical machines.



8123351 Electromechanical Training System (Labvolt Series 8010)



Festo Logo



Reference :

  • 8123351 : Electromechanical Training System (Labvolt Series 8010)




A comprehensive and modular educational solution designed for the study of electrical energy fundamentals, single-phase and three-phase electrical circuits, transformers, rotating electrical machines, and power factor correction. Featuring a four-quadrant dynamometer and computerized data acquisition and control interface, this system provides hands-on electromechanical training for universities, engineering schools, technical institutes, and vocational training centers.



FXB-X03301 Gasoline-Electric Hybrid Power System Cutaway Training Bench



Logo FXB Co. Ltd




Reference : FXB-X03301 Gasoline-Electric Hybrid Power System Cutaway Training Bench




Automotive Application: Toyota Corolla 1.8L Hybrid

The FXB-X03301 is a training bench based on an original Toyota Corolla 1.8L gasoline-electric hybrid power system, featuring educational cutaways of its main components. It enables students to study hybrid propulsion operation, energy management strategies, and energy flows between the internal combustion engine, electric machines, and high-voltage battery. Its LED-equipped control panel provides dynamic visualization of the hybrid system's operating modes and energy flow directions.



Main Components

  • Internal combustion engine
  • Hybrid automatic transmission
  • MG1 electric machine
  • MG2 electric machine
  • Inverter
  • High-voltage power cables
  • Generator
  • Demonstration panel with control software
  • Eight operating condition selection buttons
  • Two 220 V electric drive motors
  • Four LED indicators integrated into the cylinders
  • Front drive axle, front wheels, and disc brakes
  • Main power switch and emergency stop switch
  • Electrical protection switch
  • Mobile framework with lockable casters



FXB-X04326 Educational Display Cabinets for Different Traction Battery Technologies



Logo FXB Co. Ltd




Reference : FXB-X04326 Educational Display Cabinets for Different Traction Battery Technologies




Including Battery Balancing System, Testing Instruments and Digital Teaching Resources

The FXB-X04326 is an educational training system designed for the study, identification and comparison of different battery technologies used in electric and hybrid vehicles. It provides a comprehensive presentation of Lithium Iron Phosphate (LFP), Ternary Lithium-Ion (NMC) and Nickel-Metal Hydride (Ni-MH) batteries in various configurations, including prismatic, cylindrical and pouch cells.

The system integrates three-compartment display cabinets, a built-in touchscreen of at least 43 inches, complete and dissected battery samples, battery charging and discharging equipment, internal resistance testing instruments, and multimedia teaching resources. It enables students to perform practical activities involving battery identification, characterization, electrical measurements, performance testing and comparative analysis of different traction battery technologies.

FXB-X06006 Hybrid Vehicle Intelligent Fault Setting and Detection Platform



Logo FXB Co. Ltd




Reference : FXB-X06006 Hybrid Vehicle Intelligent Fault Setting and Detection Platform




Vehicle Model: 2026 BYD Qin MAX DM-i 230 km

This training platform is based on a brand-new BYD Qin MAX DM-i plug-in hybrid vehicle, modified for automotive technical education and practical training. It enables comprehensive study of hybrid vehicle architecture, electric and thermal propulsion systems, high-voltage circuits, and onboard electronic control systems.

Featuring a pedagogical body cutaway, a dedicated connection and diagnostic platform, and mechanical and electrical fault simulation systems, this equipment allows trainees to examine actual vehicle components, understand their interactions, perform measurements, conduct diagnostics, and develop practical hybrid vehicle maintenance skills.



Educational Objectives

  • Identify the overall architecture and main components of a plug-in hybrid vehicle.
  • Understand the operating principles and interaction of thermal and electric propulsion systems.
  • Study high-voltage circuits, battery management systems, and electronic control units.
  • Analyze electrical, electronic, air conditioning, steering, and braking systems.
  • Perform measurements, inspections, and diagnostic procedures on vehicle signals and operating parameters.
  • Implement mechanical, electrical, and electronic fault simulation scenarios.
  • Develop practical skills in hybrid vehicle diagnostics, preventive maintenance, and troubleshooting.



FXB-X06005 Electric Vehicle Intelligent Fault Setting and Detection Training Platform



Logo FXB Co. Ltd




Reference : FXB-X06005 Plateforme didactique de diagnostic et de simulation de pannes pour véhicules électrique




Application Vehicle: 2025 BYD Dolphin – 420 km Version

The FXB-X06005 is a professional educational platform designed for studying, analyzing, testing, and diagnosing the electrical and electronic systems of modern electric vehicles. Based on a complete 2025 BYD Dolphin 420 km electric vehicle, the platform features a specially modified and sectioned vehicle that provides direct visibility of major components, their installation positions, and their interconnections.

Combined with a dedicated fault-setting and diagnostic connection panel, this training system enables instructors to demonstrate vehicle operating principles, perform electrical measurements, and conduct practical troubleshooting exercises on the vehicle's main systems.



Educational Objectives

  • Identify the overall architecture and main components of a modern electric vehicle.
  • Understand the operating principles of electric propulsion and transmission systems.
  • Study the structure and operation of high-voltage batteries and their Battery Management System (BMS).
  • Understand electrical energy conversion, distribution, and management systems.
  • Study AC and DC charging systems and their associated control functions.
  • Analyze electric air conditioning, braking, steering, and onboard electrical systems.
  • Perform electrical and electronic measurements and signal checks on vehicle systems.
  • Develop practical skills in fault diagnosis, detection, and troubleshooting.
  • Understand safety procedures and essential precautions when working on high-voltage vehicle systems.
  • Perform practical maintenance and diagnostic exercises using an actual electric vehicle.



FXB-X05001 Power Battery Pack Testing Integrated Workbench



Logo FXB Co. Ltd




Reference : FXB-X05001 Power Battery Pack Testing Integrated Workbench




The FXB-X05001 is a comprehensive educational workbench designed for the study, testing, diagnosis and maintenance of electric vehicle traction batteries. It incorporates a 115.2 V, 20 Ah lithium iron phosphate (LiFePO₄) battery pack, a distributed Battery Management System (BMS), charging and discharging equipment, and a range of measurement and safety devices.

Combined with integrated teaching resources and diagnostic equipment, this training system enables students to understand the architecture, operation and management principles of high-voltage battery systems used in electric vehicles.



Educational Objectives

  • Understand the architecture and operating principles of electric vehicle traction batteries.
  • Study the operating principles and components of a Battery Management System (BMS).
  • Perform battery pack assembly, disassembly, installation and commissioning procedures.
  • Analyze electrical parameters of individual cells and battery packs.
  • Conduct charging and discharging tests under different operating modes.
  • Diagnose cell abnormalities and identify defective battery cells.
  • Master battery maintenance procedures and safety requirements applicable to high-voltage systems.



FXB-X04344 Educational Display Cabinet for Different Electric Drive Motor Technologies



Logo FXB Co. Ltd




Référence : FXB-X04344 Educational Display Cabinet for Different Electric Drive Motor Technologies




The FXB-X04344 educational display cabinet is designed for teaching, demonstration and comparative study of the different electric motor technologies used in new energy vehicles. It provides a practical introduction to four major electric traction motor types: DC series-wound motors, AC asynchronous motors, switched reluctance motors and permanent magnet synchronous motors.

The motors are presented in both semi-sectioned and fully disassembled configurations, allowing students to examine their mechanical and electromagnetic structures in detail. An integrated touchscreen display of at least 43 inches provides access to educational animations, structural illustrations and multimedia resources explaining the construction and operating principles of each motor technology.



Educational Objectives

  • Identify the different electric motor technologies used in new energy vehicles.
  • Recognize the main components and structural elements of electric traction motors.
  • Understand the construction and operating principles of DC traction motors, AC asynchronous motors, switched reluctance motors and permanent magnet synchronous motors.
  • Compare the technological characteristics and specific features of different electric motor configurations.
  • Develop theoretical and technical knowledge of electric vehicle propulsion systems.
  • Enhance practical learning through direct observation, disassembled components and interactive educational animations.

The equipment includes four dedicated teaching software packages or educational resource sets covering the different motor technologies. It is an ideal teaching solution for universities, engineering schools, technical institutes and vocational training centers specializing in electric and hybrid vehicles.



FXB-X04317-1 Integrated Electric Vehicle Power Drive System Training Bench with Training Software



Logo FXB Co. Ltd




Référence : FXB-X04317-1 Banc Didactique Intégré de Système de Propulsion Électrique avec Logiciel Pédagogique




The FXB-X04317-1 is a comprehensive training system designed for the study, understanding and maintenance of electric vehicle power drive systems. It incorporates genuine electric vehicle components and accurately reproduces their architecture, operating principles and control strategies.

Designed to support practical wiring, connection and system operation exercises, this training bench enables students to investigate the interactions between the main electric propulsion components while developing practical skills in installation, testing and diagnostics.



Learning Objectives

  • Identify the main components of an electric vehicle power drive system and understand their functions.
  • Study the electrical architecture and control relationships between the different system components.
  • Perform wiring, electrical connection and system assembly exercises.
  • Understand the operating principles of the traction battery, motor controller and transmission system.
  • Monitor and analyze operating parameters through the display instruments and measurement points.
  • Study regenerative braking and electrical energy recovery during braking operations.
  • Perform electrical measurements and become familiar with diagnostic procedures for electric propulsion systems.
  • Develop practical skills required for the maintenance of electric vehicles.