Référence : FXB-XXH055 Banc didactique de multiplexage automobile et de simulation CAN-BUS

FXB-XXH055 Automotive Multiplexing and CAN-BUS Simulation Training Bench

The FXB-XXH055 is a training bench designed for studying automotive multiplexing and CAN-BUS communication using functional, genuine automotive components. It enables trainees to examine data exchange between different vehicle electronic systems, including engine management, the instrument cluster, lighting, and diagnostics. Equipped with functional modules, wiring assemblies, and automotive lighting components, it provides a practical training platform for onboard electronics, automotive network architecture, and electrical diagnostics.

Training Applications

The FXB-XXH055 is suitable for vocational training centers, technical institutes, and educational facilities specializing in automotive maintenance and onboard electronics.

It supports practical training in the following areas:

• Studying automotive multiplexing principles;
• Understanding CAN-BUS network architecture and operation;
• Analyzing data exchange between different electronic modules;
• Studying electronically controlled automotive lighting systems;
• Identifying electrical system components and interconnections;
• Understanding interactions between engine management, the instrument cluster, and diagnostic functions;
• Performing practical exercises involving automotive electrical circuits and electronic systems.

Reference : FXB-XXH013 ABS/ESP System Training Bench

Vehicle Application: Volkswagen Passat

The FXB-XXH013 ABS/ESP System Training Bench is designed for the study, demonstration, and diagnosis of Anti-lock Braking Systems (ABS) and Electronic Stability Programs (ESP). Based on actual automotive components, it enables trainees to visualize system operation, study hydraulic and electrical circuits, measure sensor and actuator signals, and simulate various faults.

Suitable for technical and vocational schools, automotive training centers, and institutions specializing in vehicle maintenance, this training bench provides a practical teaching platform for theoretical and hands-on training in electronic braking and active vehicle safety systems.

Training Functions

• Study of the architecture and operating principles of ABS and ESP systems.
• Visualization of interactions between sensors, the electronic control unit, solenoid valves, and the hydraulic pump.
• Demonstration of conventional braking, ABS regulation, and ESP electronic stability correction.
• Measurement and analysis of electrical signals from sensors and actuators.
• Use of a compatible diagnostic tool to read and clear fault codes and access available system data.
• Fault simulation and practical training in fault-finding and troubleshooting procedures.

Reference : FXB-B04006 Cutaway Automotive Differential Training Model

The FXB-B04006 educational model is designed for studying and demonstrating the operation of an automotive differential. Its cutaway construction provides a clear view of the internal gears and helps trainees understand the principles of motion distribution between the output shafts, particularly when the driven wheels rotate at different speeds.

Suitable for automotive mechanics and technology training, this educational equipment supports the study of transmission mechanisms, the function of planetary and side gears, and the role of the differential in an automotive drivetrain.

Training Topics

• Structure and internal components of an automotive differential.
• Principles of motion and torque transmission.
• Operation of planetary and side gears.
• Kinematic relationship between the output shafts.
• Rotational speed differences between driven wheels.
• Role of the differential in an automotive drivetrain, particularly when cornering.

Reference : FXB-A01013 Multi-Point Fuel Injection Gasoline Engine Training Bench

The FXB-A01013 training bench is based on an electronically controlled gasoline engine of the Volkswagen Jetta EA211 type. It is designed to demonstrate the structure, operating principles and control systems of a modern four-cylinder, inline, four-stroke gasoline engine featuring water cooling and variable valve timing.

Designed for technical schools, vocational training centers and automotive training institutions, this equipment supports practical exercises in electronic fuel injection, ignition systems, engine management, electronic diagnostics and fault troubleshooting.

Educational Applications

• Study of the architecture and operation of a multi-point fuel injection gasoline engine.
• Analysis of electronic ignition and fuel injection control systems.
• Study of sensors and actuators used in engine management systems.
• Measurement and interpretation of engine control unit electrical signals.
• Use of automotive diagnostic tools to read fault codes and analyze engine data.
• Fault finding, electronic diagnostics and maintenance of engine management systems.
• Practical training in automotive mechanics and embedded automotive electronics.

Reference : FXB-A09002 Pencil Coil Ignition System Training Panel

Reference Vehicle Model: Volkswagen Passat

The FXB-A09002 training panel is designed to demonstrate the operation of an automotive pencil-coil ignition system using real components. Suitable for theoretical instruction and practical training, it helps learners study system architecture, analyze electrical signals, examine ignition timing and develop fault-diagnosis skills.

Training Configuration

• Functional ignition system using genuine pencil-type ignition coils.
• Individual pencil-coil ignition system.
• Ignition and starter switch.
• Adjustable rotary drive mechanism.
• Top Dead Centre (TDC) sensor.
• Variable ignition timing demonstration using a stroboscopic timing light.
• Fault-diagnosis functions.

Référence : FXB-A17002 Electronically Controlled Diesel Engine Training Bench

The FXB-A17002 training bench is designed for practical training in the operation, diagnostics, and maintenance of electronically controlled diesel engines. Based on a 4.76-liter turbocharged diesel engine with four inline cylinders and a four-stroke operating cycle, it enables trainees to study fuel injection, electronic engine management, and exhaust gas treatment systems.

Equipped with electrical measurement terminals, an automotive diagnostic interface, and an intelligent fault simulation and assessment system, this training bench is suitable for technical schools, specialized institutes, and vocational training centers providing automotive maintenance education.

Training Applications

• Study of electronically controlled diesel engine operation.
• Training in diesel fuel injection and engine management systems.
• Electrical signal analysis for sensors and actuators.
• Electronic diagnostics and diagnostic trouble code reading.
• Study of exhaust gas recirculation and exhaust after-treatment systems.
• Fault-finding and troubleshooting exercises.
• Practical maintenance training for turbocharged diesel engines.

Référence : FXB-A17003 Euro 6 Diesel Engine Training Bench

The FXB-A17003 training bench is designed for practical training in the operation, diagnostics, and maintenance of turbocharged diesel engines incorporating Euro 6 emissions-control technologies. Based on a four-stroke, four-cylinder inline engine with a maximum displacement of 2,000 cc, it enables trainees to study electronic engine management and exhaust after-treatment systems.

Equipped with electrical measurement terminals, an OBD-II diagnostic interface, and an intelligent fault simulation and assessment system, this training bench is suitable for technical schools, specialized institutes, and vocational training centers providing automotive mechanics and diagnostic training.

Training Applications

• Study of electronically controlled turbocharged diesel engines.
• Training in electronic diagnostics and engine signal analysis.
• Study of sensors, actuators, and engine management strategies.
• Understanding EGR, DPF, and SCR systems.
• Analysis of exhaust emissions-reduction technologies.
• Practical fault-finding and troubleshooting exercises.
• Training in the maintenance of modern diesel engines and their emissions-control systems.

Référence : FXB-A18005 Common Rail Diesel Engine Training Bench

Common Rail Diesel Engine Training Bench – FXB-A18005

The FXB-A18005 training bench is designed for studying the operation, diagnostics, and maintenance of electronically controlled high-pressure Common Rail diesel engines. Based on an engine from a Great Wall Pickup vehicle, it enables trainees to simulate different engine operating conditions and investigate electronic engine management, fuel injection, and turbocharging systems.

Equipped with measurement terminals, an automotive diagnostic interface, and a wireless fault simulation system, this training bench is suitable for technical schools, vocational training centers, and institutions specializing in automotive maintenance.

Training Applications

• Training on the operation of Common Rail diesel engines.
• Study of electronic engine management systems.
• Practical training in electrical measurements and signal analysis.
• Electronic diagnostics and diagnostic trouble code reading.
• Fault identification and troubleshooting procedures.
• Practical maintenance training for modern diesel engines.

Référence : FXB-A01014 Direct-Injection Gasoline Engine Training Bench

The FXB-A01014 training bench is an educational system designed to study and diagnose electronically controlled direct-injection gasoline engines. Based on the EA211 1.4 T engine, it allows users to simulate different engine operating conditions and analyze the parameters of its control systems.

Designed for technical schools, vocational training centers, and automotive maintenance training institutions, this equipment supports hands-on learning in modern gasoline engine operation, electronic diagnostics, and fault-finding procedures.

Training Applications

The FXB-A01014 training bench is suitable for practical training in the following areas:

• Study of direct-injection gasoline engine operation.
• Analysis of electronic engine management systems.
• Identification and study of sensors and actuators.
• Electrical parameter measurement and signal analysis.
• Use of automotive diagnostic scanners.
• Reading, interpreting, and clearing diagnostic trouble codes.
• Fault-finding exercises and practical skills assessment.

Référence : FXB-B01007 All-Wheel-Drive Automatic Transmission and Differential Training Bench

The FXB-B01007 training bench is designed for practical instruction in the operating principles of all-wheel-drive (AWD) automatic transmission systems. Featuring a cutaway automatic transmission and differential, it enables learners to observe key mechanical components and understand their operation, including the torque converter, planetary gear sets, clutch discs, and gear-shifting mechanisms.

Equipped with an electric motor for dynamic operation, a gear selector lever, and an instructional panel displaying mechanical and hydraulic diagrams, this training bench is suitable for vocational training centres, technical institutes, engineering schools, and automotive training laboratories.

Educational Applications

This training bench is intended for practical exercises and demonstrations in automotive mechanics, automatic transmissions, all-wheel-drive systems, and vehicle maintenance. It is suitable for vocational training centres, technical institutes, engineering schools, and specialised automotive technology laboratories.

Reference : FXB-B08004 AWD CVT Transmission Cutaway Training Model

The FXB-B08004 training model is designed to demonstrate and explain the operating principles of a continuously variable transmission (CVT) integrated into an all-wheel-drive (AWD) system. Its cutaway components provide a clear view of the main internal mechanisms and help learners understand how the transmission ratio varies continuously.

The model supports the study of the input shaft, planetary gear set, clutch mechanism, and ratio variation through the movement of conical pulleys. It is suitable for vocational training centres, technical institutes, engineering schools, and specialised automotive technology laboratories.

Educational Objectives

The training model enables learners to:

• Understand the fundamental operating principles of a continuously variable transmission.
• Observe the mechanisms involved in transmission ratio variation.
• Identify the main mechanical components of a CVT transmission.
• Study the functions of the input shaft, planetary gear set, and clutch mechanism.
• Understand the general operation of a CVT transmission integrated into an all-wheel-drive architecture.

Reference : FXB-F01001 Power Steering and Independent Suspension Training Bench

Product Overview

The Power Steering and Independent Suspension Training Bench is based on the front axle assembly of a Volkswagen Jetta. It is designed to provide a practical demonstration of the structure, operating principles, and functionality of the power steering and front independent suspension systems.

This automotive training equipment is intended for technical and vocational schools, vocational training centers, and institutions specializing in automotive education. It provides a practical teaching platform for theoretical instruction and hands-on training in steering and suspension systems.

The training bench supports component identification, functional demonstrations, operating simulations, and practical assembly and disassembly exercises.

Référence : FXB-G02003 Front and Rear Axle Alignment Training Bench

Reference Vehicle: Volkswagen Passat B5

Product Overview

The FXB-G02003 training bench is designed for studying and practicing front and rear axle geometry inspection and adjustment procedures. Based on the Volkswagen Passat B5, it reproduces the layout of the main suspension and steering components of the actual vehicle, enabling trainees to become familiar with the inspection and adjustment procedures specified by the vehicle manufacturer.

The training bench allows students to study the main angles and parameters involved in wheel alignment.

Front Axle Geometry

• Caster angle.
• Front wheel toe.
• Steering rack height.
• Ride height.
• Included angle, resulting from the steering axis inclination and camber angle.

Rear Axle Geometry

• Ride height.
• Thrust angle.
• Rear wheel toe.
• Rear wheel camber angle.

Reference : FXB-I19001 Automotive Central Locking and Alarm System Training Panel

The FXB-I19001 training panel is designed for studying the operation of automotive central door locking and alarm systems, based on the Volkswagen Passat B5. It enables practical exercises covering locking mechanisms, electrical signals, alarm functions, and diagnostic procedures. Equipped with accessible test points and an intelligent fault simulation system, it is a suitable training solution for vocational schools, technical institutes, and automotive maintenance training centres.

Training Applications

The FXB-I19001 training panel is suitable for practical exercises covering automotive security system architecture, central locking operation, alarm systems, associated electrical circuits, fault diagnosis, and troubleshooting methods. It can be used in vocational training centres, technical schools, institutes of technology, and automotive maintenance training facilities.

Reference : FXB-I02002 Automatic Automotive Air Conditioning Training Bench

Vehicle Application: Volkswagen Passat

The FXB-I02002 training bench is designed for the study, demonstration, and diagnosis of automatic automotive air conditioning systems incorporating heating and cooling functions. Based on an operational automotive air conditioning system, it enables trainees to analyze refrigeration circuits, control components, and the electronic air conditioning control unit.

Equipped with pressure gauges, thermometers, electrical measurement terminals, and a fault simulation system, this training bench allows trainees to measure pressure, temperature, and electrical signals, as well as perform diagnostic exercises, leak detection, and refrigeration circuit servicing activities. It is suitable for technical education institutions, vocational training centers, and laboratories specializing in automotive maintenance.

Educational Functions

• Study of the architecture and operating principles of automatic automotive air conditioning systems.
• Understanding of heating, cooling, and cabin temperature regulation principles.
• Analysis of compressor operation and high-pressure and low-pressure refrigeration circuits.
• Measurement and interpretation of refrigeration circuit pressures and temperatures.
• Measurement and analysis of electrical signals at the air conditioning control unit terminals.
• Study of the effects of refrigerant charge, engine cooling fan operation, ambient temperature, and cabin temperature.
• Fault simulation and practical diagnostic and troubleshooting exercises.
• Training in inspection, maintenance, and leak detection procedures.

Reference : FXB-E04001 Anti-Lock Braking System (ABS) Training Bench

The FXB-E04001 training bench is designed for the study, demonstration, and diagnosis of the Anti-Lock Braking System (ABS) used in Volkswagen Jetta vehicles. It enables learners to visualize hydraulic braking operation, simulate braking conditions with and without ABS intervention, and perform practical electrical and hydraulic diagnostic exercises.

Designed for technical schools, vocational training centers, and automotive training institutions, this equipment supports the teaching of modern braking systems and helps learners develop practical skills in automotive diagnostics and troubleshooting.

Educational Functions

• Visualization of hydraulic braking circuit operation.
• Study of brake bleeding procedures and hydraulic pressure measurement.
• Simulation and comparison of conventional braking and braking with ABS intervention.
• Practical exercises in diagnostics and simulated fault troubleshooting.
• Measurement and analysis of electrical signals from ABS sensors and the electronic control unit.
• Development of practical skills in automotive maintenance and diagnostics.