Reference : FXB-XXH013 ABS/ESP System Training Bench

Vehicle Application: Volkswagen Passat

The FXB-XXH013 ABS/ESP System Training Bench is designed for the study, demonstration, and diagnosis of Anti-lock Braking Systems (ABS) and Electronic Stability Programs (ESP). Based on actual automotive components, it enables trainees to visualize system operation, study hydraulic and electrical circuits, measure sensor and actuator signals, and simulate various faults.

Suitable for technical and vocational schools, automotive training centers, and institutions specializing in vehicle maintenance, this training bench provides a practical teaching platform for theoretical and hands-on training in electronic braking and active vehicle safety systems.

Training Functions

• Study of the architecture and operating principles of ABS and ESP systems.
• Visualization of interactions between sensors, the electronic control unit, solenoid valves, and the hydraulic pump.
• Demonstration of conventional braking, ABS regulation, and ESP electronic stability correction.
• Measurement and analysis of electrical signals from sensors and actuators.
• Use of a compatible diagnostic tool to read and clear fault codes and access available system data.
• Fault simulation and practical training in fault-finding and troubleshooting procedures.

Reference : FXB-B08004 AWD CVT Transmission Cutaway Training Model

The FXB-B08004 training model is designed to demonstrate and explain the operating principles of a continuously variable transmission (CVT) integrated into an all-wheel-drive (AWD) system. Its cutaway components provide a clear view of the main internal mechanisms and help learners understand how the transmission ratio varies continuously.

The model supports the study of the input shaft, planetary gear set, clutch mechanism, and ratio variation through the movement of conical pulleys. It is suitable for vocational training centres, technical institutes, engineering schools, and specialised automotive technology laboratories.

Educational Objectives

The training model enables learners to:

• Understand the fundamental operating principles of a continuously variable transmission.
• Observe the mechanisms involved in transmission ratio variation.
• Identify the main mechanical components of a CVT transmission.
• Study the functions of the input shaft, planetary gear set, and clutch mechanism.
• Understand the general operation of a CVT transmission integrated into an all-wheel-drive architecture.

Reference : FXB-A12003FXB-A12003 Automotive Starting and Charging System Training Panel

The FXB-A12003 is a training panel designed to demonstrate the starting and charging systems of Volkswagen vehicles, based on the Volkswagen Magotan architecture. It enables trainees to understand the operating principles of the starter motor, alternator, and 12 V battery while performing electrical measurements and practical diagnostic exercises. Equipped with test terminals and a wireless fault simulation and assessment system, it is suitable for technical education and vocational training in automotive maintenance.

Training Applications

The FXB-A12003 training panel is suitable for vocational training centers, technical institutes, and educational establishments specializing in automotive maintenance. It supports practical training in the following areas:

• Studying the architecture and operation of automotive starting systems;
• Understanding battery charging system operation;
• Performing electrical measurements on circuits and components;
• Practicing electrical fault diagnosis;
• Developing automotive maintenance and troubleshooting skills.

Reference : FXB-F01001 Power Steering and Independent Suspension Training Bench

Product Overview

The Power Steering and Independent Suspension Training Bench is based on the front axle assembly of a Volkswagen Jetta. It is designed to provide a practical demonstration of the structure, operating principles, and functionality of the power steering and front independent suspension systems.

This automotive training equipment is intended for technical and vocational schools, vocational training centers, and institutions specializing in automotive education. It provides a practical teaching platform for theoretical instruction and hands-on training in steering and suspension systems.

The training bench supports component identification, functional demonstrations, operating simulations, and practical assembly and disassembly exercises.

Référence : FXB-A18005 Common Rail Diesel Engine Training Bench

Common Rail Diesel Engine Training Bench – FXB-A18005

The FXB-A18005 training bench is designed for studying the operation, diagnostics, and maintenance of electronically controlled high-pressure Common Rail diesel engines. Based on an engine from a Great Wall Pickup vehicle, it enables trainees to simulate different engine operating conditions and investigate electronic engine management, fuel injection, and turbocharging systems.

Equipped with measurement terminals, an automotive diagnostic interface, and a wireless fault simulation system, this training bench is suitable for technical schools, vocational training centers, and institutions specializing in automotive maintenance.

Training Applications

• Training on the operation of Common Rail diesel engines.
• Study of electronic engine management systems.
• Practical training in electrical measurements and signal analysis.
• Electronic diagnostics and diagnostic trouble code reading.
• Fault identification and troubleshooting procedures.
• Practical maintenance training for modern diesel engines.

Référence : FXB-A17003 Euro 6 Diesel Engine Training Bench

The FXB-A17003 training bench is designed for practical training in the operation, diagnostics, and maintenance of turbocharged diesel engines incorporating Euro 6 emissions-control technologies. Based on a four-stroke, four-cylinder inline engine with a maximum displacement of 2,000 cc, it enables trainees to study electronic engine management and exhaust after-treatment systems.

Equipped with electrical measurement terminals, an OBD-II diagnostic interface, and an intelligent fault simulation and assessment system, this training bench is suitable for technical schools, specialized institutes, and vocational training centers providing automotive mechanics and diagnostic training.

Training Applications

• Study of electronically controlled turbocharged diesel engines.
• Training in electronic diagnostics and engine signal analysis.
• Study of sensors, actuators, and engine management strategies.
• Understanding EGR, DPF, and SCR systems.
• Analysis of exhaust emissions-reduction technologies.
• Practical fault-finding and troubleshooting exercises.
• Training in the maintenance of modern diesel engines and their emissions-control systems.

Reference : FXB-B04006 Cutaway Automotive Differential Training Model

The FXB-B04006 educational model is designed for studying and demonstrating the operation of an automotive differential. Its cutaway construction provides a clear view of the internal gears and helps trainees understand the principles of motion distribution between the output shafts, particularly when the driven wheels rotate at different speeds.

Suitable for automotive mechanics and technology training, this educational equipment supports the study of transmission mechanisms, the function of planetary and side gears, and the role of the differential in an automotive drivetrain.

Training Topics

• Structure and internal components of an automotive differential.
• Principles of motion and torque transmission.
• Operation of planetary and side gears.
• Kinematic relationship between the output shafts.
• Rotational speed differences between driven wheels.
• Role of the differential in an automotive drivetrain, particularly when cornering.

Reference : FXB-A01013 Multi-Point Fuel Injection Gasoline Engine Training Bench

The FXB-A01013 training bench is based on an electronically controlled gasoline engine of the Volkswagen Jetta EA211 type. It is designed to demonstrate the structure, operating principles and control systems of a modern four-cylinder, inline, four-stroke gasoline engine featuring water cooling and variable valve timing.

Designed for technical schools, vocational training centers and automotive training institutions, this equipment supports practical exercises in electronic fuel injection, ignition systems, engine management, electronic diagnostics and fault troubleshooting.

Educational Applications

• Study of the architecture and operation of a multi-point fuel injection gasoline engine.
• Analysis of electronic ignition and fuel injection control systems.
• Study of sensors and actuators used in engine management systems.
• Measurement and interpretation of engine control unit electrical signals.
• Use of automotive diagnostic tools to read fault codes and analyze engine data.
• Fault finding, electronic diagnostics and maintenance of engine management systems.
• Practical training in automotive mechanics and embedded automotive electronics.

Reference : FXB-I19003 Airbag and Seat Belt Retractor System Training Panel

The FXB-I19003 is an educational training panel designed to study automotive occupant restraint systems, particularly airbags and seat belt retractors. Based on an automotive restraint system architecture, it enables learners to examine the interaction between driver and passenger airbags, seat belts, the airbag control unit, and passenger presence detection sensors. Featuring a simulation system, electrical measurement terminals, an EOBD diagnostic interface, and a fault simulation system, it provides a comprehensive training solution for automotive safety, electronic diagnostics, and restraint system maintenance.

Educational Applications

The FXB-I19003 enables learners to study airbag system architecture, the role of seat belts and passenger presence sensors, electronic control principles, electrical measurement methods, and fault diagnosis procedures. It is suitable for practical training in automotive safety and the maintenance of electronic vehicle systems.

Reference : FXB-A09003 Twin Static Coil Ignition System Training Panel

Reference Vehicle Model: Volkswagen

The FXB-A09003 training panel is designed to demonstrate and study the operation of an electronic ignition system using a twin static ignition coil. Equipped with real, functional components, it enables learners to analyze the ignition circuit, perform electrical measurements, observe ignition timing variations and practise fault diagnosis. It is suitable for technical education institutions, vocational training centres and automotive maintenance laboratories.

Training Configuration

• Functional ignition system using a twin static ignition coil.
• High-voltage ignition leads.
• Four spark plugs.
• Adjustable-speed drive mechanism for the crankshaft sensor disc.
• Ignition and starter switch.
• Top Dead Centre (TDC) sensor.
• Ignition timing variation demonstration using a stroboscopic timing light.
• Fault simulation and diagnostic functions.

Reference : FXB-B01008 Electronic Automatic Transmission Training Bench

The FXB-B01008 training bench is designed for the practical study of electronically controlled automatic transmissions, including their operation, maintenance, testing, and diagnosis. Based on a functional cutaway automotive transmission corresponding to the Volkswagen 01M architecture, it enables trainees to observe key mechanical and hydraulic components, analyse electrical signals, and study transmission control strategies.

Equipped with an adjustable-speed electric motor, measurement terminals, operating parameter indicators, and a diagnostic interface, this training bench is suitable for technical education institutions, vocational training centres, and automotive technology laboratories.

Training Topics

• Transmission operation and gear-shifting sequences.
• Planetary gear set design and operation.
• Function of clutch discs and friction components.
• Differential operating principles, where included in the supplied configuration.
• Relationship between transmission ratios and output speed.
• Interaction between mechanical, hydraulic, and electronic systems.
• Signal measurement, fault diagnosis, and troubleshooting.

Reference : FXB-XXH054 Automotive Multiplex Network and Diagnostics Training Bench

The FXB-XXH054 is a training bench designed for the study, simulation, and diagnosis of automotive multiplex communication networks, including CAN and LIN, with optional FlexRay support. It enables trainees to analyze data exchange between electronic control units, visualize communication frames in real time, and simulate various electrical and electronic faults. Equipped with OBD-II diagnostic connectors, measurement terminals, and a network schematic display, it is suitable for vocational training in automotive electronics and diagnostics.

Training Applications

The FXB-XXH054 is intended for vocational training centers, technical institutes, automotive training facilities, and laboratories specializing in automotive electronics. It helps develop practical skills in multiplex communication networks, automotive electronics, and onboard system diagnostics.

Reference : FXB-A15003 Gasoline Engine Electronic Control System Training Panel

The FXB-A15003 training panel is designed for studying, understanding and diagnosing gasoline engine electronic control systems. Based on actual components from the engine management system of a Volkswagen Jetta 1.6L, it enables trainees to study system architecture, operating principles and the interactions between sensors, actuators and the engine electronic control unit (ECU).

Suitable for technical schools, vocational training centers and automotive training institutions, this training panel supports electrical measurements, component signal analysis and practical fault diagnosis using a compatible automotive diagnostic tool.

Training Applications

• Study of gasoline engine electronic management architecture and operating principles.
• Identification of sensors, actuators and the engine control unit.
• Analysis of electrical circuits and component signals.
• Voltage, current and resistance measurements.
• Study of ignition and fuel injection control.
• Introduction to reading and clearing diagnostic trouble codes.
• Fault diagnosis and practical troubleshooting exercises.
• Assessment of automotive maintenance and electronic diagnostic skills.

Reference : FXB-A21001 Common Rail Diesel Engine Electronic Control System Training Panel

The FXB-A21001 training panel is designed for learning, studying and diagnosing electronic control systems used in Common Rail diesel engines. Based on a Bosch-type engine management architecture, it incorporates real components to demonstrate the operation of sensors, actuators, the engine control unit (ECU) and the high-pressure fuel injection circuit.

Equipped with measurement terminals, an OBD-II diagnostic interface and an intelligent fault-setting and assessment system, this training panel enables learners to develop practical skills in signal analysis, electronic diagnostics and fault finding. It is suitable for technical schools, vocational training centres and institutions specialising in automotive maintenance.

Educational Applications

• Study of the architecture of an electronic Common Rail diesel engine management system.
• Identification of sensors, actuators and control circuits.
• Measurement and analysis of accessible electrical signals.
• Introduction to electronic diagnostics using an OBD-II interface.
• Fault-finding, troubleshooting and technical skills assessment exercises.

Référence : FXB-B01007 All-Wheel-Drive Automatic Transmission and Differential Training Bench

The FXB-B01007 training bench is designed for practical instruction in the operating principles of all-wheel-drive (AWD) automatic transmission systems. Featuring a cutaway automatic transmission and differential, it enables learners to observe key mechanical components and understand their operation, including the torque converter, planetary gear sets, clutch discs, and gear-shifting mechanisms.

Equipped with an electric motor for dynamic operation, a gear selector lever, and an instructional panel displaying mechanical and hydraulic diagrams, this training bench is suitable for vocational training centres, technical institutes, engineering schools, and automotive training laboratories.

Educational Applications

This training bench is intended for practical exercises and demonstrations in automotive mechanics, automatic transmissions, all-wheel-drive systems, and vehicle maintenance. It is suitable for vocational training centres, technical institutes, engineering schools, and specialised automotive technology laboratories.

Reference : FXB-E04001 Anti-Lock Braking System (ABS) Training Bench

The FXB-E04001 training bench is designed for the study, demonstration, and diagnosis of the Anti-Lock Braking System (ABS) used in Volkswagen Jetta vehicles. It enables learners to visualize hydraulic braking operation, simulate braking conditions with and without ABS intervention, and perform practical electrical and hydraulic diagnostic exercises.

Designed for technical schools, vocational training centers, and automotive training institutions, this equipment supports the teaching of modern braking systems and helps learners develop practical skills in automotive diagnostics and troubleshooting.

Educational Functions

• Visualization of hydraulic braking circuit operation.
• Study of brake bleeding procedures and hydraulic pressure measurement.
• Simulation and comparison of conventional braking and braking with ABS intervention.
• Practical exercises in diagnostics and simulated fault troubleshooting.
• Measurement and analysis of electrical signals from ABS sensors and the electronic control unit.
• Development of practical skills in automotive maintenance and diagnostics.