Reference : FXB-E04001 Anti-Lock Braking System (ABS) Training Bench

The FXB-E04001 training bench is designed for the study, demonstration, and diagnosis of the Anti-Lock Braking System (ABS) used in Volkswagen Jetta vehicles. It enables learners to visualize hydraulic braking operation, simulate braking conditions with and without ABS intervention, and perform practical electrical and hydraulic diagnostic exercises.

Designed for technical schools, vocational training centers, and automotive training institutions, this equipment supports the teaching of modern braking systems and helps learners develop practical skills in automotive diagnostics and troubleshooting.

Educational Functions

• Visualization of hydraulic braking circuit operation.
• Study of brake bleeding procedures and hydraulic pressure measurement.
• Simulation and comparison of conventional braking and braking with ABS intervention.
• Practical exercises in diagnostics and simulated fault troubleshooting.
• Measurement and analysis of electrical signals from ABS sensors and the electronic control unit.
• Development of practical skills in automotive maintenance and diagnostics.

Reference : FXB-G03001 Automotive Chassis Systems Cutaway Training Model

The FXB-G03001 is a comprehensive automotive chassis training model based on the Toyota Hiace. It is designed to demonstrate the layout and operation of major vehicle systems, including the internal combustion engine, transmission, drive shafts, rear axle, steering, braking, suspension, and lighting systems. Its cutaway components and adjustable-speed electric drive allow trainees to observe internal mechanisms and understand the flow of mechanical power. The welded chassis is mounted on a stand with lockable castors and a manual tilt adjustment, providing improved access to components located underneath the vehicle.

Educational Applications

This training model supports the study of overall vehicle architecture, interactions between mechanical and electrical systems, drivetrain operation, and the arrangement of chassis components. It is suitable for classroom demonstrations, practical training sessions, and introductory automotive diagnostics and maintenance exercises.

References

• AHO14-200 : High-Resolution Automotive Oscilloscope 12 bits, 200 MHz, 4 channels, with DMM

The Micsig AHO1 Series is a professional high-resolution automotive oscilloscope designed for advanced vehicle diagnostics. It features a 12-bit ADC, 200 MHz bandwidth, 4 analog channels, a 1 GSa/s real-time sampling rate, and 110 Mpts memory depth, delivering accurate and reliable measurements for automotive workshops and technical laboratories.

Its ultra-slim 3.1 cm portable design, integrated high-capacity lithium-ion battery, and USB Type-C charging capability make it ideal for mobile diagnostics and on-site maintenance operations.

With its innovative dual software architecture for automotive and general-purpose applications, along with dedicated testing modes for engines, sensors, actuators, and EV systems, the AHO1 Series supports diagnostics for both internal combustion and new energy vehicles.

Technical Specifications

• Bandwidth: 200 MHz
• Analog Channels: 4
• Real-Time Sampling Rate: 1 GSa/s
• Rise Time: ≤ 1.75 ns
• Memory Depth: 110 Mpts
• Vertical Resolution: 12-bit
• Waveform Capture Rate: up to 50,000 wfms/s
• Interfaces: USB 3.0 Host, USB Type-C, LAN, HDMI
• Display: 8" TFT LCD capacitive touchscreen, 1280 × 800 pixels
• Battery: 3.7 V, 16000 mAh lithium-ion battery
• Power Supply: DC 12 V adapter and Type-C 5 V charging
• Multimeter Accuracy: 4⅚ digits
• Dimensions: 265 × 174 × 31 mm

Reference : FXB-A01013 Multi-Point Fuel Injection Gasoline Engine Training Bench

The FXB-A01013 training bench is based on an electronically controlled gasoline engine of the Volkswagen Jetta EA211 type. It is designed to demonstrate the structure, operating principles and control systems of a modern four-cylinder, inline, four-stroke gasoline engine featuring water cooling and variable valve timing.

Designed for technical schools, vocational training centers and automotive training institutions, this equipment supports practical exercises in electronic fuel injection, ignition systems, engine management, electronic diagnostics and fault troubleshooting.

Educational Applications

• Study of the architecture and operation of a multi-point fuel injection gasoline engine.
• Analysis of electronic ignition and fuel injection control systems.
• Study of sensors and actuators used in engine management systems.
• Measurement and interpretation of engine control unit electrical signals.
• Use of automotive diagnostic tools to read fault codes and analyze engine data.
• Fault finding, electronic diagnostics and maintenance of engine management systems.
• Practical training in automotive mechanics and embedded automotive electronics.

Référence : FXB-A01014 Direct-Injection Gasoline Engine Training Bench

The FXB-A01014 training bench is an educational system designed to study and diagnose electronically controlled direct-injection gasoline engines. Based on the EA211 1.4 T engine, it allows users to simulate different engine operating conditions and analyze the parameters of its control systems.

Designed for technical schools, vocational training centers, and automotive maintenance training institutions, this equipment supports hands-on learning in modern gasoline engine operation, electronic diagnostics, and fault-finding procedures.

Training Applications

The FXB-A01014 training bench is suitable for practical training in the following areas:

• Study of direct-injection gasoline engine operation.
• Analysis of electronic engine management systems.
• Identification and study of sensors and actuators.
• Electrical parameter measurement and signal analysis.
• Use of automotive diagnostic scanners.
• Reading, interpreting, and clearing diagnostic trouble codes.
• Fault-finding exercises and practical skills assessment.

Reference : FXB-A09003 Twin Static Coil Ignition System Training Panel

Reference Vehicle Model: Volkswagen

The FXB-A09003 training panel is designed to demonstrate and study the operation of an electronic ignition system using a twin static ignition coil. Equipped with real, functional components, it enables learners to analyze the ignition circuit, perform electrical measurements, observe ignition timing variations and practise fault diagnosis. It is suitable for technical education institutions, vocational training centres and automotive maintenance laboratories.

Training Configuration

• Functional ignition system using a twin static ignition coil.
• High-voltage ignition leads.
• Four spark plugs.
• Adjustable-speed drive mechanism for the crankshaft sensor disc.
• Ignition and starter switch.
• Top Dead Centre (TDC) sensor.
• Ignition timing variation demonstration using a stroboscopic timing light.
• Fault simulation and diagnostic functions.

Référence : FXB-G02003 Front and Rear Axle Alignment Training Bench

Reference Vehicle: Volkswagen Passat B5

Product Overview

The FXB-G02003 training bench is designed for studying and practicing front and rear axle geometry inspection and adjustment procedures. Based on the Volkswagen Passat B5, it reproduces the layout of the main suspension and steering components of the actual vehicle, enabling trainees to become familiar with the inspection and adjustment procedures specified by the vehicle manufacturer.

The training bench allows students to study the main angles and parameters involved in wheel alignment.

Front Axle Geometry

• Caster angle.
• Front wheel toe.
• Steering rack height.
• Ride height.
• Included angle, resulting from the steering axis inclination and camber angle.

Rear Axle Geometry

• Ride height.
• Thrust angle.
• Rear wheel toe.
• Rear wheel camber angle.

Référence : FXB-XXH055 Banc didactique de multiplexage automobile et de simulation CAN-BUS

FXB-XXH055 Automotive Multiplexing and CAN-BUS Simulation Training Bench

The FXB-XXH055 is a training bench designed for studying automotive multiplexing and CAN-BUS communication using functional, genuine automotive components. It enables trainees to examine data exchange between different vehicle electronic systems, including engine management, the instrument cluster, lighting, and diagnostics. Equipped with functional modules, wiring assemblies, and automotive lighting components, it provides a practical training platform for onboard electronics, automotive network architecture, and electrical diagnostics.

Training Applications

The FXB-XXH055 is suitable for vocational training centers, technical institutes, and educational facilities specializing in automotive maintenance and onboard electronics.

It supports practical training in the following areas:

• Studying automotive multiplexing principles;
• Understanding CAN-BUS network architecture and operation;
• Analyzing data exchange between different electronic modules;
• Studying electronically controlled automotive lighting systems;
• Identifying electrical system components and interconnections;
• Understanding interactions between engine management, the instrument cluster, and diagnostic functions;
• Performing practical exercises involving automotive electrical circuits and electronic systems.

Reference : FXB-I10008 Automotive Door Control System Training Panel

The FXB-I10008 is a didactic training panel designed for studying, demonstrating, and diagnosing automotive door control systems. Based on a Volkswagen vehicle configuration, it incorporates functional components for studying power mirrors, central locking, electric windows, and the anti-theft system. Equipped with electrical test points, LED status indicators, and an intelligent fault simulation system, it is a suitable training solution for technical and vocational education institutions and automotive maintenance training centers.

Educational Applications

The FXB-I10008 training panel is particularly suitable for training courses covering:

• Automotive electrical and electronic systems.
• Central locking and door control systems.
• Electric windows and power mirrors.
• Automotive control circuits and actuators.
• Electrical measurement, diagnostics, and troubleshooting methods.
• Practical automotive maintenance training.

Reference : FXB-A09004 Hall Effect Ignition System Training Panel

Reference Vehicle Model: Volkswagen Jetta

The FXB-A09004 training panel is designed to demonstrate and study the operation of an automotive ignition system using a Hall effect sensor. Equipped with real, functional components, it enables learners to analyze the ignition circuit, understand the roles of the distributor and ignition module, perform electrical measurements and practise fault diagnosis. It is suitable for technical education institutions, vocational training centres and automotive maintenance laboratories.

Training Configuration

• Ignition distributor equipped with a Hall effect sensor.
• Ignition coil.
• Electronic ignition module.
• High-voltage ignition leads.
• Four spark plugs.
• Rotary drive mechanism.
• Ignition timing variation demonstration using a stroboscopic timing light.
• Fault simulation and diagnostic functions.

Reference : FXB-I12008 Automotive Lighting and Ignition System Training Panel

The FXB-I12008 is an educational training panel designed for the practical study of automotive exterior lighting and ignition systems, based on the Volkswagen Passat B5 configuration. It enables learners to understand circuit architecture, lighting operation, electrical controls and the main components of the ignition system.

Featuring functional components, electrical measurement terminals and a fault simulation system, this equipment provides a practical training solution for technical schools, vocational training centers and automotive maintenance laboratories.

Basic Configuration

• Headlights
• Turn signals and brake lights
• Control panel
• Relays and main switch
• Alternator driven by a variable-speed electric motor with a frequency converter to demonstrate battery charging
• Ignition system, including an ignition coil and spark plugs
• Measurement terminals and fault simulation system
• Mobile metal frame with integrated worktop

Reference : FXB-A09002 Pencil Coil Ignition System Training Panel

Reference Vehicle Model: Volkswagen Passat

The FXB-A09002 training panel is designed to demonstrate the operation of an automotive pencil-coil ignition system using real components. Suitable for theoretical instruction and practical training, it helps learners study system architecture, analyze electrical signals, examine ignition timing and develop fault-diagnosis skills.

Training Configuration

• Functional ignition system using genuine pencil-type ignition coils.
• Individual pencil-coil ignition system.
• Ignition and starter switch.
• Adjustable rotary drive mechanism.
• Top Dead Centre (TDC) sensor.
• Variable ignition timing demonstration using a stroboscopic timing light.
• Fault-diagnosis functions.

Reference : FXB-B01017 Automated Dry Dual-Clutch Transmission Training Bench

The FXB-B01017 training bench is designed for practical instruction in automated manual transmissions equipped with a dry dual-clutch system. Based on a real, operational automotive transmission, it enables learners to study the mechanical structure, clutch and gear-shifting actuators, and electronic transmission control principles.

Driven by an adjustable-speed three-phase electric motor, the bench supports demonstrations of selector positions, starting in neutral, gear changes, and reverse operation. It also incorporates measurement terminals, a diagnostic interface, display instruments, and an educational fault simulation and assessment system.

Educational Applications

This training bench is suitable for vocational training centres, technical education institutions, specialised training institutes, and engineering schools offering courses in automotive mechanics, automated transmissions, onboard electronic systems, and vehicle diagnostics.

Référence : FXB-A18005 Common Rail Diesel Engine Training Bench

Common Rail Diesel Engine Training Bench – FXB-A18005

The FXB-A18005 training bench is designed for studying the operation, diagnostics, and maintenance of electronically controlled high-pressure Common Rail diesel engines. Based on an engine from a Great Wall Pickup vehicle, it enables trainees to simulate different engine operating conditions and investigate electronic engine management, fuel injection, and turbocharging systems.

Equipped with measurement terminals, an automotive diagnostic interface, and a wireless fault simulation system, this training bench is suitable for technical schools, vocational training centers, and institutions specializing in automotive maintenance.

Training Applications

• Training on the operation of Common Rail diesel engines.
• Study of electronic engine management systems.
• Practical training in electrical measurements and signal analysis.
• Electronic diagnostics and diagnostic trouble code reading.
• Fault identification and troubleshooting procedures.
• Practical maintenance training for modern diesel engines.

Reference : FXB-A09005 Breaker-Point Ignition System Training Panel

The FXB-A09005 is an educational training panel designed to demonstrate the operation and maintenance of conventional automotive breaker-point ignition systems. Using real, functional components, it enables learners to understand ignition system architecture, perform electrical measurements, study ignition timing and carry out fault-diagnosis exercises.

Designed for technical schools, vocational training centers and automotive training laboratories, this equipment provides a practical learning platform that combines theoretical instruction with hands-on activities. The reference vehicle model is the BJ212.

Basic Configuration

• Breaker-point ignition distributor
• Ignition coil
• Ballast resistor
• Ignition leads
• Four spark plugs
• Adjustable rotary drive mechanism
• Facility for observing ignition timing variation using a stroboscopic lamp
• Practical wiring arrangement for the individual components
• Fault simulation and diagnostic system

Reference : FXB-B01008 Electronic Automatic Transmission Training Bench

The FXB-B01008 training bench is designed for the practical study of electronically controlled automatic transmissions, including their operation, maintenance, testing, and diagnosis. Based on a functional cutaway automotive transmission corresponding to the Volkswagen 01M architecture, it enables trainees to observe key mechanical and hydraulic components, analyse electrical signals, and study transmission control strategies.

Equipped with an adjustable-speed electric motor, measurement terminals, operating parameter indicators, and a diagnostic interface, this training bench is suitable for technical education institutions, vocational training centres, and automotive technology laboratories.

Training Topics

• Transmission operation and gear-shifting sequences.
• Planetary gear set design and operation.
• Function of clutch discs and friction components.
• Differential operating principles, where included in the supplied configuration.
• Relationship between transmission ratios and output speed.
• Interaction between mechanical, hydraulic, and electronic systems.
• Signal measurement, fault diagnosis, and troubleshooting.