- New

Référence : FXB-X04344 Educational Display Cabinet for Different Electric Drive Motor Technologies
The FXB-X04344 educational display cabinet is designed for teaching, demonstration and comparative study of the different electric motor technologies used in new energy vehicles. It provides a practical introduction to four major electric traction motor types: DC series-wound motors, AC asynchronous motors, switched reluctance motors and permanent magnet synchronous motors.
The motors are presented in both semi-sectioned and fully disassembled configurations, allowing students to examine their mechanical and electromagnetic structures in detail. An integrated touchscreen display of at least 43 inches provides access to educational animations, structural illustrations and multimedia resources explaining the construction and operating principles of each motor technology.
The equipment includes four dedicated teaching software packages or educational resource sets covering the different motor technologies. It is an ideal teaching solution for universities, engineering schools, technical institutes and vocational training centers specializing in electric and hybrid vehicles.
The FXB-X04344 educational display cabinet is designed for the comparative study of the main electric motor technologies used in new energy vehicles. It combines semi-sectioned motor models, fully disassembled motor components, an integrated multimedia touchscreen and interactive educational resources.
The different motor models are installed in a three-compartment display cabinet made of aluminum alloy. Integrated spotlights highlight the displayed components and facilitate observation of the internal motor structures.
3.1. DC Traction Motor
3.2. AC Asynchronous Motor
3.3. Switched Reluctance Motor
3.4. Permanent Magnet Synchronous Motor
The equipment is fitted with an integrated touchscreen display of at least 43 inches, providing access to educational resources covering the four motor technologies presented in the cabinet.
The educational content includes:
FXB is identified as the exclusive Global Industry Partner of WorldSkills International for Skill 33 – Automobile Technology.

Référence : FXB-G02003 Front and Rear Axle Alignment Training Bench
The FXB-G02003 training bench is designed for studying and practicing front and rear axle geometry inspection and adjustment procedures. Based on the Volkswagen Passat B5, it reproduces the layout of the main suspension and steering components of the actual vehicle, enabling trainees to become familiar with the inspection and adjustment procedures specified by the vehicle manufacturer.
The training bench allows students to study the main angles and parameters involved in wheel alignment.
Front Axle Geometry
Rear Axle Geometry

Reference : FXB-B01008 Electronic Automatic Transmission Training Bench
The FXB-B01008 training bench is designed for the practical study of electronically controlled automatic transmissions, including their operation, maintenance, testing, and diagnosis. Based on a functional cutaway automotive transmission corresponding to the Volkswagen 01M architecture, it enables trainees to observe key mechanical and hydraulic components, analyse electrical signals, and study transmission control strategies.
Equipped with an adjustable-speed electric motor, measurement terminals, operating parameter indicators, and a diagnostic interface, this training bench is suitable for technical education institutions, vocational training centres, and automotive technology laboratories.

Référence : FXB-XXH055 Banc didactique de multiplexage automobile et de simulation CAN-BUS
The FXB-XXH055 is a training bench designed for studying automotive multiplexing and CAN-BUS communication using functional, genuine automotive components. It enables trainees to examine data exchange between different vehicle electronic systems, including engine management, the instrument cluster, lighting, and diagnostics. Equipped with functional modules, wiring assemblies, and automotive lighting components, it provides a practical training platform for onboard electronics, automotive network architecture, and electrical diagnostics.
The FXB-XXH055 is suitable for vocational training centers, technical institutes, and educational facilities specializing in automotive maintenance and onboard electronics.
It supports practical training in the following areas:

Reference : FXB-B01017 Automated Dry Dual-Clutch Transmission Training Bench
The FXB-B01017 training bench is designed for practical instruction in automated manual transmissions equipped with a dry dual-clutch system. Based on a real, operational automotive transmission, it enables learners to study the mechanical structure, clutch and gear-shifting actuators, and electronic transmission control principles.
Driven by an adjustable-speed three-phase electric motor, the bench supports demonstrations of selector positions, starting in neutral, gear changes, and reverse operation. It also incorporates measurement terminals, a diagnostic interface, display instruments, and an educational fault simulation and assessment system.
This training bench is suitable for vocational training centres, technical education institutions, specialised training institutes, and engineering schools offering courses in automotive mechanics, automated transmissions, onboard electronic systems, and vehicle diagnostics.

Référence : FXB-A01014 Direct-Injection Gasoline Engine Training Bench
The FXB-A01014 training bench is an educational system designed to study and diagnose electronically controlled direct-injection gasoline engines. Based on the EA211 1.4 T engine, it allows users to simulate different engine operating conditions and analyze the parameters of its control systems.
Designed for technical schools, vocational training centers, and automotive maintenance training institutions, this equipment supports hands-on learning in modern gasoline engine operation, electronic diagnostics, and fault-finding procedures.
The FXB-A01014 training bench is suitable for practical training in the following areas:

Reference : FXB-B06004 Manual Transmission and Clutch Training Bench
The FXB-B06004 training bench is designed for studying and demonstrating the operation of a manual gearbox combined with a mechanical clutch. Based on an automotive architecture associated with the Volkswagen Jetta, it enables trainees to observe internal transmission components and understand the principles of gear selection, synchronisation, and torque transmission.
Featuring a cutaway gearbox, a complete clutch assembly, and an electric drive for dynamic demonstrations, this training equipment is suitable for technical education institutions, vocational training centres, and automotive technology laboratories.

Reference : FXB-B08004 AWD CVT Transmission Cutaway Training Model
The FXB-B08004 training model is designed to demonstrate and explain the operating principles of a continuously variable transmission (CVT) integrated into an all-wheel-drive (AWD) system. Its cutaway components provide a clear view of the main internal mechanisms and help learners understand how the transmission ratio varies continuously.
The model supports the study of the input shaft, planetary gear set, clutch mechanism, and ratio variation through the movement of conical pulleys. It is suitable for vocational training centres, technical institutes, engineering schools, and specialised automotive technology laboratories.
The training model enables learners to:

Reference : FXB-A09004 Hall Effect Ignition System Training Panel
The FXB-A09004 training panel is designed to demonstrate and study the operation of an automotive ignition system using a Hall effect sensor. Equipped with real, functional components, it enables learners to analyze the ignition circuit, understand the roles of the distributor and ignition module, perform electrical measurements and practise fault diagnosis. It is suitable for technical education institutions, vocational training centres and automotive maintenance laboratories.

Référence : FXB-B01007 All-Wheel-Drive Automatic Transmission and Differential Training Bench
The FXB-B01007 training bench is designed for practical instruction in the operating principles of all-wheel-drive (AWD) automatic transmission systems. Featuring a cutaway automatic transmission and differential, it enables learners to observe key mechanical components and understand their operation, including the torque converter, planetary gear sets, clutch discs, and gear-shifting mechanisms.
Equipped with an electric motor for dynamic operation, a gear selector lever, and an instructional panel displaying mechanical and hydraulic diagrams, this training bench is suitable for vocational training centres, technical institutes, engineering schools, and automotive training laboratories.
This training bench is intended for practical exercises and demonstrations in automotive mechanics, automatic transmissions, all-wheel-drive systems, and vehicle maintenance. It is suitable for vocational training centres, technical institutes, engineering schools, and specialised automotive technology laboratories.

The Micsig AHO1 Series is a professional high-resolution automotive oscilloscope designed for advanced vehicle diagnostics. It features a 12-bit ADC, 200 MHz bandwidth, 4 analog channels, a 1 GSa/s real-time sampling rate, and 110 Mpts memory depth, delivering accurate and reliable measurements for automotive workshops and technical laboratories.
Its ultra-slim 3.1 cm portable design, integrated high-capacity lithium-ion battery, and USB Type-C charging capability make it ideal for mobile diagnostics and on-site maintenance operations.
With its innovative dual software architecture for automotive and general-purpose applications, along with dedicated testing modes for engines, sensors, actuators, and EV systems, the AHO1 Series supports diagnostics for both internal combustion and new energy vehicles.

Référence : FXB-A17003 Euro 6 Diesel Engine Training Bench
The FXB-A17003 training bench is designed for practical training in the operation, diagnostics, and maintenance of turbocharged diesel engines incorporating Euro 6 emissions-control technologies. Based on a four-stroke, four-cylinder inline engine with a maximum displacement of 2,000 cc, it enables trainees to study electronic engine management and exhaust after-treatment systems.
Equipped with electrical measurement terminals, an OBD-II diagnostic interface, and an intelligent fault simulation and assessment system, this training bench is suitable for technical schools, specialized institutes, and vocational training centers providing automotive mechanics and diagnostic training.

Reference : FXB-A09005 Breaker-Point Ignition System Training Panel
The FXB-A09005 is an educational training panel designed to demonstrate the operation and maintenance of conventional automotive breaker-point ignition systems. Using real, functional components, it enables learners to understand ignition system architecture, perform electrical measurements, study ignition timing and carry out fault-diagnosis exercises.
Designed for technical schools, vocational training centers and automotive training laboratories, this equipment provides a practical learning platform that combines theoretical instruction with hands-on activities. The reference vehicle model is the BJ212.

Reference : FXB-X06005 Plateforme didactique de diagnostic et de simulation de pannes pour véhicules électrique
The FXB-X06005 is a professional educational platform designed for studying, analyzing, testing, and diagnosing the electrical and electronic systems of modern electric vehicles. Based on a complete 2025 BYD Dolphin 420 km electric vehicle, the platform features a specially modified and sectioned vehicle that provides direct visibility of major components, their installation positions, and their interconnections.
Combined with a dedicated fault-setting and diagnostic connection panel, this training system enables instructors to demonstrate vehicle operating principles, perform electrical measurements, and conduct practical troubleshooting exercises on the vehicle's main systems.

Reference : FXB-X06006 Hybrid Vehicle Intelligent Fault Setting and Detection Platform
This training platform is based on a brand-new BYD Qin MAX DM-i plug-in hybrid vehicle, modified for automotive technical education and practical training. It enables comprehensive study of hybrid vehicle architecture, electric and thermal propulsion systems, high-voltage circuits, and onboard electronic control systems.
Featuring a pedagogical body cutaway, a dedicated connection and diagnostic platform, and mechanical and electrical fault simulation systems, this equipment allows trainees to examine actual vehicle components, understand their interactions, perform measurements, conduct diagnostics, and develop practical hybrid vehicle maintenance skills.

Reference : FXB-B04006 Cutaway Automotive Differential Training Model
The FXB-B04006 educational model is designed for studying and demonstrating the operation of an automotive differential. Its cutaway construction provides a clear view of the internal gears and helps trainees understand the principles of motion distribution between the output shafts, particularly when the driven wheels rotate at different speeds.
Suitable for automotive mechanics and technology training, this educational equipment supports the study of transmission mechanisms, the function of planetary and side gears, and the role of the differential in an automotive drivetrain.

Reference : FXB-A05004-R1 Gasoline-Electric Hybrid Power System Training Software

Référence : FXB-X04344 Educational Display Cabinet for Different Electric Drive Motor Technologies
The FXB-X04344 educational display cabinet is designed for teaching, demonstration and comparative study of the different electric motor technologies used in new energy vehicles. It provides a practical introduction to four major electric traction motor types: DC series-wound motors, AC asynchronous motors, switched reluctance motors and permanent magnet synchronous motors.
The motors are presented in both semi-sectioned and fully disassembled configurations, allowing students to examine their mechanical and electromagnetic structures in detail. An integrated touchscreen display of at least 43 inches provides access to educational animations, structural illustrations and multimedia resources explaining the construction and operating principles of each motor technology.
The equipment includes four dedicated teaching software packages or educational resource sets covering the different motor technologies. It is an ideal teaching solution for universities, engineering schools, technical institutes and vocational training centers specializing in electric and hybrid vehicles.
We use cookies to improve our services, make personal offers, and enhance your experience. If you do not accept optional cookies below, your experience may be affected. If you want to know more, please, read the Cookie Policy.