- New

Reference : FXB-X05001 Power Battery Pack Testing Integrated Workbench
The FXB-X05001 is a comprehensive educational workbench designed for the study, testing, diagnosis and maintenance of electric vehicle traction batteries. It incorporates a 115.2 V, 20 Ah lithium iron phosphate (LiFePO₄) battery pack, a distributed Battery Management System (BMS), charging and discharging equipment, and a range of measurement and safety devices.
Combined with integrated teaching resources and diagnostic equipment, this training system enables students to understand the architecture, operation and management principles of high-voltage battery systems used in electric vehicles.
The FXB-X05001 is based on a traction battery representative of those used in modern electric vehicles. It consists of lithium iron phosphate (LiFePO₄) cells with aluminum housings, featuring a nominal voltage of 3.2 V and a capacity of 20 Ah per cell.
The battery pack comprises 36 cells connected in series and arranged into two modules, providing a nominal voltage of 115.2 V and a capacity of 20 Ah. Ten additional cells are supplied for practical assembly, connection and diagnostic exercises.
The battery management system adopts a distributed architecture consisting of one main control module and two acquisition modules. Each acquisition module monitors 18 battery cells. Communication between the modules is established through a CAN network.
The system enables battery parameter acquisition and monitoring, as well as the management of charging and discharging operations. A dedicated display provides access to battery pack operating information.
The workbench incorporates a battery capacity testing and distribution instrument equipped with eight independent channels. It supports various charging and discharging operating modes:
The workbench includes a forced-air-cooled intelligent onboard charger, a DC-DC converter and an auxiliary battery. The onboard charger communicates with the battery pack through the CAN network. The DC-DC converter reduces the high-voltage battery supply to a low-voltage output suitable for auxiliary circuits.
The workbench is equipped with an emergency power-off switch allowing immediate disconnection of the high-voltage system. It also incorporates a maintenance switch, charging, discharging and precharging relays, a precharging resistor, a Hall-effect sensor and dedicated charging and discharging connectors.
The battery cells feature M6 threaded terminals and are interconnected using flexible conductive plates, allowing repeated connection and disconnection during practical training exercises.
The training system is mounted on a mobile workbench equipped with lockable casters. It includes a 24-inch touchscreen with integrated teaching resources, together with measurement instruments and tools required for practical training activities.
FXB is the exclusive Global Industry Partner of WorldSkills International for Skill 33 – Automobile Technology.

Reference : FXB-I19001 Automotive Central Locking and Alarm System Training Panel
The FXB-I19001 training panel is designed for studying the operation of automotive central door locking and alarm systems, based on the Volkswagen Passat B5. It enables practical exercises covering locking mechanisms, electrical signals, alarm functions, and diagnostic procedures. Equipped with accessible test points and an intelligent fault simulation system, it is a suitable training solution for vocational schools, technical institutes, and automotive maintenance training centres.
The FXB-I19001 training panel is suitable for practical exercises covering automotive security system architecture, central locking operation, alarm systems, associated electrical circuits, fault diagnosis, and troubleshooting methods. It can be used in vocational training centres, technical schools, institutes of technology, and automotive maintenance training facilities.

Reference : FXB-G03001 Automotive Chassis Systems Cutaway Training Model
The FXB-G03001 is a comprehensive automotive chassis training model based on the Toyota Hiace. It is designed to demonstrate the layout and operation of major vehicle systems, including the internal combustion engine, transmission, drive shafts, rear axle, steering, braking, suspension, and lighting systems. Its cutaway components and adjustable-speed electric drive allow trainees to observe internal mechanisms and understand the flow of mechanical power. The welded chassis is mounted on a stand with lockable castors and a manual tilt adjustment, providing improved access to components located underneath the vehicle.
This training model supports the study of overall vehicle architecture, interactions between mechanical and electrical systems, drivetrain operation, and the arrangement of chassis components. It is suitable for classroom demonstrations, practical training sessions, and introductory automotive diagnostics and maintenance exercises.

Reference : FXB-A09003 Twin Static Coil Ignition System Training Panel
The FXB-A09003 training panel is designed to demonstrate and study the operation of an electronic ignition system using a twin static ignition coil. Equipped with real, functional components, it enables learners to analyze the ignition circuit, perform electrical measurements, observe ignition timing variations and practise fault diagnosis. It is suitable for technical education institutions, vocational training centres and automotive maintenance laboratories.

Reference : FXB-I10008 Automotive Door Control System Training Panel
The FXB-I10008 is a didactic training panel designed for studying, demonstrating, and diagnosing automotive door control systems. Based on a Volkswagen vehicle configuration, it incorporates functional components for studying power mirrors, central locking, electric windows, and the anti-theft system. Equipped with electrical test points, LED status indicators, and an intelligent fault simulation system, it is a suitable training solution for technical and vocational education institutions and automotive maintenance training centers.
The FXB-I10008 training panel is particularly suitable for training courses covering:

The Micsig AHO1 Series is a professional high-resolution automotive oscilloscope designed for advanced vehicle diagnostics. It features a 12-bit ADC, 200 MHz bandwidth, 4 analog channels, a 1 GSa/s real-time sampling rate, and 110 Mpts memory depth, delivering accurate and reliable measurements for automotive workshops and technical laboratories.
Its ultra-slim 3.1 cm portable design, integrated high-capacity lithium-ion battery, and USB Type-C charging capability make it ideal for mobile diagnostics and on-site maintenance operations.
With its innovative dual software architecture for automotive and general-purpose applications, along with dedicated testing modes for engines, sensors, actuators, and EV systems, the AHO1 Series supports diagnostics for both internal combustion and new energy vehicles.

Reference : FXB-A01013 Multi-Point Fuel Injection Gasoline Engine Training Bench
The FXB-A01013 training bench is based on an electronically controlled gasoline engine of the Volkswagen Jetta EA211 type. It is designed to demonstrate the structure, operating principles and control systems of a modern four-cylinder, inline, four-stroke gasoline engine featuring water cooling and variable valve timing.
Designed for technical schools, vocational training centers and automotive training institutions, this equipment supports practical exercises in electronic fuel injection, ignition systems, engine management, electronic diagnostics and fault troubleshooting.

Reference : FXB-I19003 Airbag and Seat Belt Retractor System Training Panel
The FXB-I19003 is an educational training panel designed to study automotive occupant restraint systems, particularly airbags and seat belt retractors. Based on an automotive restraint system architecture, it enables learners to examine the interaction between driver and passenger airbags, seat belts, the airbag control unit, and passenger presence detection sensors. Featuring a simulation system, electrical measurement terminals, an EOBD diagnostic interface, and a fault simulation system, it provides a comprehensive training solution for automotive safety, electronic diagnostics, and restraint system maintenance.
The FXB-I19003 enables learners to study airbag system architecture, the role of seat belts and passenger presence sensors, electronic control principles, electrical measurement methods, and fault diagnosis procedures. It is suitable for practical training in automotive safety and the maintenance of electronic vehicle systems.

Reference : FXB-A12003FXB-A12003 Automotive Starting and Charging System Training Panel
The FXB-A12003 is a training panel designed to demonstrate the starting and charging systems of Volkswagen vehicles, based on the Volkswagen Magotan architecture. It enables trainees to understand the operating principles of the starter motor, alternator, and 12 V battery while performing electrical measurements and practical diagnostic exercises. Equipped with test terminals and a wireless fault simulation and assessment system, it is suitable for technical education and vocational training in automotive maintenance.
The FXB-A12003 training panel is suitable for vocational training centers, technical institutes, and educational establishments specializing in automotive maintenance. It supports practical training in the following areas:

Reference : FXB-A05004-R1 Gasoline-Electric Hybrid Power System Training Software

Référence : FXB-XXH055 Banc didactique de multiplexage automobile et de simulation CAN-BUS
The FXB-XXH055 is a training bench designed for studying automotive multiplexing and CAN-BUS communication using functional, genuine automotive components. It enables trainees to examine data exchange between different vehicle electronic systems, including engine management, the instrument cluster, lighting, and diagnostics. Equipped with functional modules, wiring assemblies, and automotive lighting components, it provides a practical training platform for onboard electronics, automotive network architecture, and electrical diagnostics.
The FXB-XXH055 is suitable for vocational training centers, technical institutes, and educational facilities specializing in automotive maintenance and onboard electronics.
It supports practical training in the following areas:

Reference : FXB-E04001 Anti-Lock Braking System (ABS) Training Bench
The FXB-E04001 training bench is designed for the study, demonstration, and diagnosis of the Anti-Lock Braking System (ABS) used in Volkswagen Jetta vehicles. It enables learners to visualize hydraulic braking operation, simulate braking conditions with and without ABS intervention, and perform practical electrical and hydraulic diagnostic exercises.
Designed for technical schools, vocational training centers, and automotive training institutions, this equipment supports the teaching of modern braking systems and helps learners develop practical skills in automotive diagnostics and troubleshooting.

Référence : FXB-B01007 All-Wheel-Drive Automatic Transmission and Differential Training Bench
The FXB-B01007 training bench is designed for practical instruction in the operating principles of all-wheel-drive (AWD) automatic transmission systems. Featuring a cutaway automatic transmission and differential, it enables learners to observe key mechanical components and understand their operation, including the torque converter, planetary gear sets, clutch discs, and gear-shifting mechanisms.
Equipped with an electric motor for dynamic operation, a gear selector lever, and an instructional panel displaying mechanical and hydraulic diagrams, this training bench is suitable for vocational training centres, technical institutes, engineering schools, and automotive training laboratories.
This training bench is intended for practical exercises and demonstrations in automotive mechanics, automatic transmissions, all-wheel-drive systems, and vehicle maintenance. It is suitable for vocational training centres, technical institutes, engineering schools, and specialised automotive technology laboratories.

Référence : FXB-G02003 Front and Rear Axle Alignment Training Bench
The FXB-G02003 training bench is designed for studying and practicing front and rear axle geometry inspection and adjustment procedures. Based on the Volkswagen Passat B5, it reproduces the layout of the main suspension and steering components of the actual vehicle, enabling trainees to become familiar with the inspection and adjustment procedures specified by the vehicle manufacturer.
The training bench allows students to study the main angles and parameters involved in wheel alignment.
Front Axle Geometry
Rear Axle Geometry

Reference : FXB-F02002 Electric Power Steering (EPS) System Training Bench
This training bench is based on a Volkswagen Magotan-type front axle assembly. It is designed to demonstrate and explain the structure, operation, and control principles of the Electric Power Steering (EPS) system, together with the associated front axle and suspension components.
Designed for technical and vocational schools, specialized educational institutions, and automotive training centers, this equipment provides a practical learning platform for studying electric power steering systems, their electronic components, and their control mechanisms.
The training bench enables users to observe system operation, perform electrical measurements, carry out diagnostic procedures, and practice fault-finding and control-signal analysis.

Reference : FXB-X06006 Hybrid Vehicle Intelligent Fault Setting and Detection Platform
This training platform is based on a brand-new BYD Qin MAX DM-i plug-in hybrid vehicle, modified for automotive technical education and practical training. It enables comprehensive study of hybrid vehicle architecture, electric and thermal propulsion systems, high-voltage circuits, and onboard electronic control systems.
Featuring a pedagogical body cutaway, a dedicated connection and diagnostic platform, and mechanical and electrical fault simulation systems, this equipment allows trainees to examine actual vehicle components, understand their interactions, perform measurements, conduct diagnostics, and develop practical hybrid vehicle maintenance skills.

Référence : FXB-X04317-1 Banc Didactique Intégré de Système de Propulsion Électrique avec Logiciel Pédagogique
The FXB-X04317-1 is a comprehensive training system designed for the study, understanding and maintenance of electric vehicle power drive systems. It incorporates genuine electric vehicle components and accurately reproduces their architecture, operating principles and control strategies.
Designed to support practical wiring, connection and system operation exercises, this training bench enables students to investigate the interactions between the main electric propulsion components while developing practical skills in installation, testing and diagnostics.

Reference : FXB-X05001 Power Battery Pack Testing Integrated Workbench
The FXB-X05001 is a comprehensive educational workbench designed for the study, testing, diagnosis and maintenance of electric vehicle traction batteries. It incorporates a 115.2 V, 20 Ah lithium iron phosphate (LiFePO₄) battery pack, a distributed Battery Management System (BMS), charging and discharging equipment, and a range of measurement and safety devices.
Combined with integrated teaching resources and diagnostic equipment, this training system enables students to understand the architecture, operation and management principles of high-voltage battery systems used in electric vehicles.
We use cookies to improve our services, make personal offers, and enhance your experience. If you do not accept optional cookies below, your experience may be affected. If you want to know more, please, read the Cookie Policy.