Reference : FXB-A09005 Breaker-Point Ignition System Training Panel

The FXB-A09005 is an educational training panel designed to demonstrate the operation and maintenance of conventional automotive breaker-point ignition systems. Using real, functional components, it enables learners to understand ignition system architecture, perform electrical measurements, study ignition timing and carry out fault-diagnosis exercises.

Designed for technical schools, vocational training centers and automotive training laboratories, this equipment provides a practical learning platform that combines theoretical instruction with hands-on activities. The reference vehicle model is the BJ212.

Basic Configuration

• Breaker-point ignition distributor
• Ignition coil
• Ballast resistor
• Ignition leads
• Four spark plugs
• Adjustable rotary drive mechanism
• Facility for observing ignition timing variation using a stroboscopic lamp
• Practical wiring arrangement for the individual components
• Fault simulation and diagnostic system

Reference : FXB-XXH054 Automotive Multiplex Network and Diagnostics Training Bench

The FXB-XXH054 is a training bench designed for the study, simulation, and diagnosis of automotive multiplex communication networks, including CAN and LIN, with optional FlexRay support. It enables trainees to analyze data exchange between electronic control units, visualize communication frames in real time, and simulate various electrical and electronic faults. Equipped with OBD-II diagnostic connectors, measurement terminals, and a network schematic display, it is suitable for vocational training in automotive electronics and diagnostics.

Training Applications

The FXB-XXH054 is intended for vocational training centers, technical institutes, automotive training facilities, and laboratories specializing in automotive electronics. It helps develop practical skills in multiplex communication networks, automotive electronics, and onboard system diagnostics.

Reference : FXB-D01002 Gasoline Engine and Manual Transmission Cutaway Training Model

The FXB-D01002 training model, based on the transmission system of a Volkswagen Jetta, is designed for theoretical and practical automotive mechanics training. Its cutaway design allows learners to observe internal components and understand the operation of a manual transmission with 5 forward gears and 1 reverse gear. Driven by a single-phase gear reduction motor, the mechanism operates at low speed to facilitate observation of the power flow and gear operation. The training bench also features a protective cover for the drive components and a dedicated support for transmission disassembly exercises.

Training Applications

The model supports the following educational activities:

• Studying the design and operating principles of a manual transmission.
• Observing gear movement and gear-selection mechanisms.
• Understanding the mechanical power flow through the transmission system.
• Conducting demonstrations and practical exercises involving transmission components.
• Introducing learners to disassembly procedures and mechanical component identification.

Reference : FXB-B04006 Cutaway Automotive Differential Training Model

The FXB-B04006 educational model is designed for studying and demonstrating the operation of an automotive differential. Its cutaway construction provides a clear view of the internal gears and helps trainees understand the principles of motion distribution between the output shafts, particularly when the driven wheels rotate at different speeds.

Suitable for automotive mechanics and technology training, this educational equipment supports the study of transmission mechanisms, the function of planetary and side gears, and the role of the differential in an automotive drivetrain.

Training Topics

• Structure and internal components of an automotive differential.
• Principles of motion and torque transmission.
• Operation of planetary and side gears.
• Kinematic relationship between the output shafts.
• Rotational speed differences between driven wheels.
• Role of the differential in an automotive drivetrain, particularly when cornering.

Référence : FXB-B01007 All-Wheel-Drive Automatic Transmission and Differential Training Bench

The FXB-B01007 training bench is designed for practical instruction in the operating principles of all-wheel-drive (AWD) automatic transmission systems. Featuring a cutaway automatic transmission and differential, it enables learners to observe key mechanical components and understand their operation, including the torque converter, planetary gear sets, clutch discs, and gear-shifting mechanisms.

Equipped with an electric motor for dynamic operation, a gear selector lever, and an instructional panel displaying mechanical and hydraulic diagrams, this training bench is suitable for vocational training centres, technical institutes, engineering schools, and automotive training laboratories.

Educational Applications

This training bench is intended for practical exercises and demonstrations in automotive mechanics, automatic transmissions, all-wheel-drive systems, and vehicle maintenance. It is suitable for vocational training centres, technical institutes, engineering schools, and specialised automotive technology laboratories.

Reference : FXB-B06004 Manual Transmission and Clutch Training Bench

The FXB-B06004 training bench is designed for studying and demonstrating the operation of a manual gearbox combined with a mechanical clutch. Based on an automotive architecture associated with the Volkswagen Jetta, it enables trainees to observe internal transmission components and understand the principles of gear selection, synchronisation, and torque transmission.

Featuring a cutaway gearbox, a complete clutch assembly, and an electric drive for dynamic demonstrations, this training equipment is suitable for technical education institutions, vocational training centres, and automotive technology laboratories.

Training Topics

• Construction and operation of a manual gearbox.
• Function and operating principles of a mechanical clutch.
• Gear mechanisms and torque transmission.
• Gear selection and engagement principles.
• Synchroniser operation.
• Interaction between the clutch, gearbox, and transmission components.

Reference : FXB-A09002 Pencil Coil Ignition System Training Panel

Reference Vehicle Model: Volkswagen Passat

The FXB-A09002 training panel is designed to demonstrate the operation of an automotive pencil-coil ignition system using real components. Suitable for theoretical instruction and practical training, it helps learners study system architecture, analyze electrical signals, examine ignition timing and develop fault-diagnosis skills.

Training Configuration

• Functional ignition system using genuine pencil-type ignition coils.
• Individual pencil-coil ignition system.
• Ignition and starter switch.
• Adjustable rotary drive mechanism.
• Top Dead Centre (TDC) sensor.
• Variable ignition timing demonstration using a stroboscopic timing light.
• Fault-diagnosis functions.

Référence : FXB-A17002 Electronically Controlled Diesel Engine Training Bench

The FXB-A17002 training bench is designed for practical training in the operation, diagnostics, and maintenance of electronically controlled diesel engines. Based on a 4.76-liter turbocharged diesel engine with four inline cylinders and a four-stroke operating cycle, it enables trainees to study fuel injection, electronic engine management, and exhaust gas treatment systems.

Equipped with electrical measurement terminals, an automotive diagnostic interface, and an intelligent fault simulation and assessment system, this training bench is suitable for technical schools, specialized institutes, and vocational training centers providing automotive maintenance education.

Training Applications

• Study of electronically controlled diesel engine operation.
• Training in diesel fuel injection and engine management systems.
• Electrical signal analysis for sensors and actuators.
• Electronic diagnostics and diagnostic trouble code reading.
• Study of exhaust gas recirculation and exhaust after-treatment systems.
• Fault-finding and troubleshooting exercises.
• Practical maintenance training for turbocharged diesel engines.

Reference : FXB-A05004-R1 Gasoline-Electric Hybrid Power System Training Software

FXB-A05004-R1 – Gasoline-Electric Hybrid Power System Training Software

Automotive Model: Toyota Corolla

Reference : FXB-E04001 Anti-Lock Braking System (ABS) Training Bench

The FXB-E04001 training bench is designed for the study, demonstration, and diagnosis of the Anti-Lock Braking System (ABS) used in Volkswagen Jetta vehicles. It enables learners to visualize hydraulic braking operation, simulate braking conditions with and without ABS intervention, and perform practical electrical and hydraulic diagnostic exercises.

Designed for technical schools, vocational training centers, and automotive training institutions, this equipment supports the teaching of modern braking systems and helps learners develop practical skills in automotive diagnostics and troubleshooting.

Educational Functions

• Visualization of hydraulic braking circuit operation.
• Study of brake bleeding procedures and hydraulic pressure measurement.
• Simulation and comparison of conventional braking and braking with ABS intervention.
• Practical exercises in diagnostics and simulated fault troubleshooting.
• Measurement and analysis of electrical signals from ABS sensors and the electronic control unit.
• Development of practical skills in automotive maintenance and diagnostics.

Reference : FXB-A21001 Common Rail Diesel Engine Electronic Control System Training Panel

The FXB-A21001 training panel is designed for learning, studying and diagnosing electronic control systems used in Common Rail diesel engines. Based on a Bosch-type engine management architecture, it incorporates real components to demonstrate the operation of sensors, actuators, the engine control unit (ECU) and the high-pressure fuel injection circuit.

Equipped with measurement terminals, an OBD-II diagnostic interface and an intelligent fault-setting and assessment system, this training panel enables learners to develop practical skills in signal analysis, electronic diagnostics and fault finding. It is suitable for technical schools, vocational training centres and institutions specialising in automotive maintenance.

Educational Applications

• Study of the architecture of an electronic Common Rail diesel engine management system.
• Identification of sensors, actuators and control circuits.
• Measurement and analysis of accessible electrical signals.
• Introduction to electronic diagnostics using an OBD-II interface.
• Fault-finding, troubleshooting and technical skills assessment exercises.

Reference : FXB-F02002 Electric Power Steering (EPS) System Training Bench

Product Overview

This training bench is based on a Volkswagen Magotan-type front axle assembly. It is designed to demonstrate and explain the structure, operation, and control principles of the Electric Power Steering (EPS) system, together with the associated front axle and suspension components.

Designed for technical and vocational schools, specialized educational institutions, and automotive training centers, this equipment provides a practical learning platform for studying electric power steering systems, their electronic components, and their control mechanisms.

The training bench enables users to observe system operation, perform electrical measurements, carry out diagnostic procedures, and practice fault-finding and control-signal analysis.

References

• AHO14-200 : High-Resolution Automotive Oscilloscope 12 bits, 200 MHz, 4 channels, with DMM

The Micsig AHO1 Series is a professional high-resolution automotive oscilloscope designed for advanced vehicle diagnostics. It features a 12-bit ADC, 200 MHz bandwidth, 4 analog channels, a 1 GSa/s real-time sampling rate, and 110 Mpts memory depth, delivering accurate and reliable measurements for automotive workshops and technical laboratories.

Its ultra-slim 3.1 cm portable design, integrated high-capacity lithium-ion battery, and USB Type-C charging capability make it ideal for mobile diagnostics and on-site maintenance operations.

With its innovative dual software architecture for automotive and general-purpose applications, along with dedicated testing modes for engines, sensors, actuators, and EV systems, the AHO1 Series supports diagnostics for both internal combustion and new energy vehicles.

Technical Specifications

• Bandwidth: 200 MHz
• Analog Channels: 4
• Real-Time Sampling Rate: 1 GSa/s
• Rise Time: ≤ 1.75 ns
• Memory Depth: 110 Mpts
• Vertical Resolution: 12-bit
• Waveform Capture Rate: up to 50,000 wfms/s
• Interfaces: USB 3.0 Host, USB Type-C, LAN, HDMI
• Display: 8" TFT LCD capacitive touchscreen, 1280 × 800 pixels
• Battery: 3.7 V, 16000 mAh lithium-ion battery
• Power Supply: DC 12 V adapter and Type-C 5 V charging
• Multimeter Accuracy: 4⅚ digits
• Dimensions: 265 × 174 × 31 mm

Reference : FXB-I14009

The FXB-I14009 training panel is designed for studying and demonstrating the operation of automotive windshield wiper and washer systems. Based on a Volkswagen vehicle system, it enables learners to operate the main wiping modes, including intermittent, low-speed, and high-speed wiping, as well as the windshield washing function. Equipped with electrical test points and an intelligent fault simulation system, it is a suitable educational solution for technical education institutions, vocational training centers, and automotive maintenance laboratories.

Educational Applications

The FXB-I14009 training panel is particularly suitable for training courses covering:

• Automotive electrical and electronic systems.
• Windshield wiper and washer systems.
• Rain sensors and multifunction control switches.
• Automotive electrical control circuits and actuators.
• Electrical measurement, diagnostics, and troubleshooting methods.
• Practical automotive maintenance training.

Référence : FXB-A17003 Euro 6 Diesel Engine Training Bench

The FXB-A17003 training bench is designed for practical training in the operation, diagnostics, and maintenance of turbocharged diesel engines incorporating Euro 6 emissions-control technologies. Based on a four-stroke, four-cylinder inline engine with a maximum displacement of 2,000 cc, it enables trainees to study electronic engine management and exhaust after-treatment systems.

Equipped with electrical measurement terminals, an OBD-II diagnostic interface, and an intelligent fault simulation and assessment system, this training bench is suitable for technical schools, specialized institutes, and vocational training centers providing automotive mechanics and diagnostic training.

Training Applications

• Study of electronically controlled turbocharged diesel engines.
• Training in electronic diagnostics and engine signal analysis.
• Study of sensors, actuators, and engine management strategies.
• Understanding EGR, DPF, and SCR systems.
• Analysis of exhaust emissions-reduction technologies.
• Practical fault-finding and troubleshooting exercises.
• Training in the maintenance of modern diesel engines and their emissions-control systems.

Référence : FXB-A01014 Direct-Injection Gasoline Engine Training Bench

The FXB-A01014 training bench is an educational system designed to study and diagnose electronically controlled direct-injection gasoline engines. Based on the EA211 1.4 T engine, it allows users to simulate different engine operating conditions and analyze the parameters of its control systems.

Designed for technical schools, vocational training centers, and automotive maintenance training institutions, this equipment supports hands-on learning in modern gasoline engine operation, electronic diagnostics, and fault-finding procedures.

Training Applications

The FXB-A01014 training bench is suitable for practical training in the following areas:

• Study of direct-injection gasoline engine operation.
• Analysis of electronic engine management systems.
• Identification and study of sensors and actuators.
• Electrical parameter measurement and signal analysis.
• Use of automotive diagnostic scanners.
• Reading, interpreting, and clearing diagnostic trouble codes.
• Fault-finding exercises and practical skills assessment.