References

• GCP-0275 : DC to 2 MHz, 500 A
• GCP-0550 : DC to 5 MHz, 350 A
• GCP-2525 : DC to 25 MHz, 170 A

GCP Series Current Probe

The GCP Series Current Probe delivers precise and reliable AC/DC current measurements for demanding testing environments. Designed for ease of use and performance stability, it is an ideal solution for engineers and technicians working with power electronics and industrial systems.

Key Features

• Accurate and easy-to-use AC/DC current measurement
• Low noise and minimal DC drift for stable, repeatable results
• Split-core probe head for quick and convenient connection to conductors

Applications

• Power supplies
• Motor drives
• Semiconductor devices
• Power inverters and converters
• Industrial and consumer electronics
• Transportation systems
• Electronic ballasts

Ordering Information

• GDP-025 – 25 MHz High Voltage Differential Probe
• GDP-050 – 50 MHz High Voltage Differential Probe
• GDP-100 – 100 MHz High Voltage Differential Probe

Key Features

• Bandwidth options of 25 MHz, 50 MHz, and 100 MHz
• Differential voltage measurement up to 7,000 V (GDP-050 / GDP-100)
• Differential voltage measurement up to 1,400 V (GDP-025)
• Flexible attenuation options to support a wide range of applications
• Modular design with replaceable probe connectors for enhanced versatility and easy adaptation to different test environments

Applications

• Power supply design and development
• Power device evaluation
• Power converter design
• Floating and high-voltage measurements

References

• GRF-1300A : RF & Communication Training System

The GRF-1300A is a comprehensive RF and communication trainer designed for hands-on learning in academic and technical training environments. It enables students and instructors to explore fundamental and advanced RF concepts through practical experimentation and troubleshooting exercises.

• Baseband Signal Generation: Sine, triangle, and square waveforms
• Baseband Frequency Range: 0.1 Hz to 3 MHz
• RF Frequency Range: 870 MHz to 920 MHz
• Modulation Modes: AM and FM
• Integrated Mixer and 2.4 GHz Bandpass Filter
• Fault Simulation Capability:
  • 5 programmable On/Off switches
  • 5 test points
  • Simulates up to 8 fault conditions for troubleshooting training
• USB Interface: Supports remote control and system integration

The GRF-1300A provides a practical and interactive platform for understanding RF signal generation, modulation techniques, frequency conversion, and diagnostic procedures.

Reference

• USG-LF44 : RF Signal Generator

Key Features

The USG-LF44 is a compact and versatile RF signal generator designed for laboratory testing, education, and RF system development. It delivers stable continuous wave (CW) signals across a wide frequency range, making it suitable for a variety of RF measurement and calibration applications.

• Frequency Range: 34.5 MHz to 4.4 GHz
• Output Power Range: –30 dBm to 0 dBm
• Signal Type: Continuous Wave (CW), unmodulated
• Operating Modes:
  • Fixed Frequency
  • Frequency Sweep
  • Frequency Hopping
  • Power Sweep
• Phase Noise: –107 dBc/Hz @ 100 kHz offset
• Frequency Resolution: 10 kHz
• USB Interface: Powered and controlled via PC USB connection
• PC Software: Compatible with multiple operating systems

The USG-LF44 provides a flexible and cost-effective solution for RF testing environments requiring reliable signal generation and easy PC integration.

Reference

• GSP-730 : Spectrum Analyzer 150 kHz ~ 3 GHz

Key Features

The GSP-730 is a compact and cost-effective spectrum analyzer designed for RF education, laboratory testing, and basic communication signal analysis. Covering a wide frequency range up to 3 GHz, it provides essential measurement capabilities for both academic and industrial environments.

• Frequency Range: 150 kHz to 3 GHz
• Autoset Function: Automatic configuration for quick signal detection
• Noise Floor: ≤ –100 dBm
• Resolution Bandwidth (RBW): 30 kHz, 100 kHz, 300 kHz, 1 MHz
• Measurement Functions: ACPR, CHPW (Channel Power), OCBW (Occupied Bandwidth)
• Display Traces: Up to 3 traces in different colors
• Split Window Function: Simultaneous display of multiple measurement views
• Limit Line Function: Pass/Fail evaluation against defined limits
• Remote Control Software: PC-based instrument control
• Training Support: Presentation materials available for educational courses
• Interfaces: USB Device, USB Host, RS-232C

The GSP-730 delivers reliable RF performance and intuitive operation, making it an ideal solution for RF training, troubleshooting, and entry-level spectrum analysis applications.

References

• GSP-8800 TG : 9 kHz ~ 8,0 GHz
• GSP-8380 TG : 9 kHz ~ 3,8 GHz
• GSP-8180 TG : 9 kHz ~ 1,8 GHz

Key Features

• Frequency Range: 9 kHz to 8.0 GHz / 3.8 GHz / 1.8 GHz (depending on model)
• Resolution Bandwidth (RBW): 1 Hz to 1 MHz, selectable in 1-3-5-10 sequence
• Video Bandwidth (VBW): 10 Hz to 3 MHz, selectable in 1-3-5-10 sequence
• Phase Noise: –104 dBc/Hz
• Sensitivity: –160 dBm/Hz (typical, with preamplifier enabled)
• Integrated AM/FM Demodulation
• Integrated Time Spectrum Function
• Measurement Functions: ACPR, OCBW, CHPW, n dB Bandwidth, Pass/Fail, Frequency Counter, Noise Marker
• Built-in 20 dB Preamplifier
• Integrated Tracking Generator
• Communication Interfaces: LAN, USB Host, USB Device
• Display: 10.4" XGA (1024 × 768)
• Optional: EMI Filter

Key Features

• Designed for oscilloscope demonstration and training
• Compatible with GDS-3000 / GDS-2000A / MSO-2000A / GDS-2000E series
• Integrated signal generator for real-world waveform simulation
• 5 V DC power input with USB power support (Type-B interface)

References

,

• GDS-912 : Oscilloscope 100 MHz, 2 channels
• GDS-912G : Oscilloscope 100 MHz, 2 channels, with a 25 MHz AWG.

Key Features

• Bandwidth: 100 MHz
• Sample Rate: Up to 1 GS/s
• Channels: 2
• Rise Time: ≤ 3.5 ns
• Bandwidth Limit: 20 MHz
• Vertical Resolution (A/D): 8-bit
• Maximum Input Voltage: ≤ 300 Vrms
• Time Base Range: 2 ns/div to 1000 s/div
• Memory Depth: 20 Mpts
• Display: 7-inch LCD (800 × 480 resolution)
• Communication Interface: USB 2.0 (Host / Device)

Built-in Waveform Generator (GDS-912G)

• Frequency Range: Up to 25 MHz
• Supported Waveforms: Sine, Square, Ramp, Pulse, and Arbitrary

Reference :

GDS-1102B Oscilloscope 100 MHz, 2-channel

GDS-1104B Oscilloscope 100 MHz, 4-channel

GDS-1202B Oscilloscope 200 MHz, 2-channel

Technical Advantages

• Bandwidth of 200 MHz and 100 MHz for 2-channel models
• 100 MHz bandwidth for 4-channel models
• Maximum sampling rate of 1 GSa/s
• Maximum memory depth of 10 Mpts per channel
• 7-inch WVGA LCD display (800 × 480 resolution)
• 256-color intensity-graded display for enhanced waveform visualization
• Advanced triggering and serial bus decoding for I²C, SPI, UART, CAN, and LIN
• FFT frequency-domain analysis with up to 1 Mpt record length
• Zero Key function for instant reset of horizontal timebase, vertical scale, and trigger level
• Compact and innovative exterior design, ideal for laboratory and portable applications

References :

GDS-2104A Oscilloscope 100 MHz, 4-channel

GDS-2204A Oscilloscope 200 MHz, 4-channel

GDS-2304A Oscilloscope 300 MHz, 4-channel

Technical Advantages

• Bandwidth: 300 MHz, 200 MHz, and 100 MHz with 4 input channels
• Sampling rate: Real-time 2 GSa/s; Equivalent-time up to 100 GSa/s
• Record length: 2 Mpts
• Vertical amplifier: 1 mV/div to 10 V/div
• Time base: 1 ns/div to 100 s/div
• Waveform update rate: 80,000 wfms/s for accurate signal capture
• Display: 8-inch high-resolution TFT LCD (800 × 600)
• Advanced memory features: Segmented memory and waveform search for optimized record length efficiency
• Navigation: Zoom window, read/pause functions for fast waveform analysis
• Automatic measurements: 36 functions with a variety of selectable parameters
• Optional modules: 8- or 16-channel logic analyzer, Function generator
• Standard interfaces: USB
• Optional interfaces: LAN / GPIB
• Bus analysis: Expandable CAN/LIN bus analysis with advanced logic, recording, DVM, and H-extension functions

References :

GDS-2102E Oscilloscope 100 MHz, 2-channel

GDS-2104E Oscilloscope 100 MHz, 4-channel

GDS-2202E Oscilloscope 200 MHz, 2-channel

GDS-2204E Oscilloscope 200 MHz, 4-channel

Technical Advantages

• Bandwidth options of 100 MHz or 200 MHz, with 2 or 4 input channels depending on the model
• Real-time sampling rate up to 1 GSa/s
• 10 Mpts memory depth per channel, combined with advanced VPO (Visual Persistence Oscilloscope) waveform display technology
• High waveform update rate of up to 120'000 waveforms per second (wfms/s) for accurate capture of transient events
• 8-inch WVGA TFT LCD display, providing excellent readability and user comfort
• FFT analysis with up to 1 M points, enabling high-resolution frequency-domain measurements
• Built-in digital high-pass and low-pass filters for advanced signal processing
• Segmented memory with up to 29'000 segments, along with waveform search functions for efficient detection and analysis of rare events
• Advanced triggering and serial bus decoding capabilities, including I²C, SPI, UART, CAN, and LIN
• Data logging function allowing long-term signal monitoring for up to 100 hours
• Remote data storage via Internet, enabling easy access, sharing, and off-site analysis

Reference :

GDS-3104A Oscilloscope 1 GHz, 4-channel

Technical Advantages

• Wide bandwidth of 1 GHz, with a four-channel configuration, enabling accurate analysis of high-frequency signals.
• High real-time sampling rate of up to 5 GSa/s on a single channel and 2.5 GSa/s on all channels, ensuring faithful acquisition of fast and transient signals.
• Deep memory of 200 Mpts per channel, allowing long record lengths and detailed waveform analysis.
• High waveform refresh rate of up to 200'000 waveforms per second (wfm/s), making it easier to detect infrequent and intermittent events.
• Large 10.2-inch TFT color LCD display (800 × 480), providing clear and comfortable waveform visualization.
• Advanced signal search functions, optimizing record length efficiency and enabling rapid identification of relevant events.
• 38 automatic measurement functions, offering a wide range of analysis options for fast and reliable signal evaluation.
• High-resolution acquisition mode, improving measurement accuracy and reducing noise for enhanced signal fidelity.
• Triggering and serial bus decoding capabilities for I²C, UART, CAN, and LIN, ideal for embedded and industrial applications.
• Integrated dual-channel spectrum analyzer (DC to 2.5 GHz) with spectrogram display, allowing simultaneous time- and frequency-domain analysis.
• Built-in two-channel arbitrary waveform generator, 25 MHz, for flexible signal generation and functional testing.
• Power analysis package with 13 dedicated measurement functions
• Optional advanced features:
  
  • 16-channel logic analyzer (MSO) for combined analog and digital signal analysis

References

• MDO-2102A – Oscilloscope 100 MHz, 2 channels, with Spectrum Analyzer
• MDO-2202A – Oscilloscope 200 MHz, 2 channels, with Spectrum Analyzer
• MDO-2302A – Oscilloscope 300 MHz, 2 channels, with Spectrum Analyzer
• MDO-2102AG – Oscilloscope 100 MHz, 2 channels, with Spectrum Analyzer and Function Generator
• MDO-2202AG – Oscilloscope 200 MHz, 2 channels, with Spectrum Analyzer and Function Generator
• MDO-2302AG – Oscilloscope 300 MHz, 2 channels, with Spectrum Analyzer and Function Generator

Technical Advantages

• Available bandwidths: 100 MHz, 200 MHz, and 300 MHz, with 2 channels
• Real-time sampling rate up to 2 GSa/s
• Memory depth of 20 Mpoints per channel, featuring VPO waveform display technology
• Waveform update rate up to 120'000 waveforms per second (wfms/s)
• 8-inch WVGA TFT LCD display for clear and precise visualization
• 1 Mpoint FFT function, providing high-resolution frequency-domain analysis
• Built-in digital filters: high-pass, low-pass, and band-pass
• Advanced waveform search functions
• Serial bus triggering and decoding: I²C, UART, CAN, and LIN
• Data recording function, allowing long-term signal monitoring for up to 1,000 hours
• Network storage capability for efficient data management
• Mask test function for rapid signal validation
• Integrated Spectrum Analyzer, DC to 1 GHz

Built-in Waveform Generator (MDO-2000AG Series)

• 2-channel Function Generator, 0.1 Hz to 25 MHz, 200 MSa/s, 14-bit resolution
• Waveform types: Sine, Square, Pulse, Ramp, DC, Noise, Sinc, Gaston, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac

References

• MDO-2102EG – Oscilloscope 100 MHz, 2 channels, with Spectrum Analyzer and 2-channel 25 MHz Function Generator
• MDO-2104EG – Oscilloscope 100 MHz, 4 channels, with Spectrum Analyzer and 2-channel 25 MHz Function Generator
• MDO-2202EG – Oscilloscope 200 MHz, 2 channels, with Spectrum Analyzer and 2-channel 25 MHz Function Generator
• MDO-2204EG – Oscilloscope 200 MHz, 4 channels, with Spectrum Analyzer and 2-channel 25 MHz Function Generator
• MDO-2102EX – Oscilloscope 100 MHz, 2 channels, with Spectrum Analyzer, 2-channel 25 MHz Function Generator, True RMS 5,000-point digital multimeter (DMM), and a 5V/1A power supply
• MDO-2104EX – Oscilloscope 100 MHz, 4 channels, with Spectrum Analyzer, 2-channel 25 MHz Function Generator, True RMS 5,000-point digital multimeter (DMM), and a 5V/1A power supply
• MDO-2202EX – Oscilloscope 200 MHz, 2 channels, with Spectrum Analyzer, 2-channel 25 MHz Function Generator, True RMS 5,000-point digital multimeter (DMM), and a 5V/1A power supply
• MDO-2204EX – Oscilloscope 200 MHz, 4 channels, with Spectrum Analyzer, 2-channel 25 MHz Function Generator, True RMS 5,000-point digital multimeter (DMM), and a 5V/1A power supply

Technical Advantages

• Available bandwidths: 100 MHz and 200 MHz, with 2 or 4 channels
• Real-time sampling rate 1 GSa/s per channel
• Memory depth of 10 Mpoints per channel, featuring VPO waveform display technology
• Waveform update rate up to 120'000 wfms/s
• 8-inch WVGA TFT LCD display for clear and detailed visualization
• Free frequency response analysis software included
• FFT up to 1 Mpoint, providing high-resolution frequency-domain measurements
• Built-in digital filters: high-pass, low-pass, and band-pass
• 29,000 segmented memories and advanced waveform search functions
• Serial bus triggering and decoding: I²C, SPI, UART, CAN, and LIN
• Data recording function, allowing signal monitoring for up to 1,000 hours
• Network storage capability for efficient data management
• Mask test function for fast signal validation
• Integrated Spectrum Analyzer, DC to 500 MHz
• 2-channel Function Generator, 0.1 Hz to 25 MHz, 200 MSa/s, 14-bit resolution
• Waveform types: Sine, Square, Pulse, Ramp, DC, Noise, Sinc, Gaston, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac

Built-in digital multimeter and a power supply (MDO-2000EX Series)

• True RMS 5'000-point digital multimeter
• 5V/1A power supply

References

• MPO-2202P: 200 MHz, 2 channels – Pro Version
• MPO-2204P: 200 MHz, 4 channels – Pro Version

Programmable Multifunction Oscilloscope

Key features

• Bandwidth: 200 MHz
• Advanced automation: Python scripting support for remote control and automated testing
• Serial bus triggering and decoding: I²C, SPI, UART, CAN, LIN
• Extended decoding capabilities: CAN FD, FlexRay, USB 2.0 (Full Speed), USB Power Delivery, I²S
• Long-term data recording: signal change tracking and recording for up to 1'000 hours
• Integrated network storage function
• Built-in spectrum analyzer with spectrogram display
• Integrated arbitrary waveform generator: 25 MHz, 2 channels
• Built-in digital multimeter
• Integrated regulated power supply:
  • Dual-channel output
  • Continuously adjustable voltage from 1 V to 20 V
  • Adjustment resolution: 0.1 V
• Communication interfaces: LAN, USB Host / USB Device
• Display: 8-inch TFT color screen, WVGA resolution 800 × 480

References

• MSO-2102EA: 100 MHz oscilloscope, 2 channels, featuring an integrated 16-channel logic analyzer and a 25 MHz dual-channel function generator.
• MSO-2104EA: 100 MHz oscilloscope, 4 channels, featuring an integrated 16-channel logic analyzer and a 25 MHz dual-channel function generator.
• MSO-2202EA: 200 MHz oscilloscope, 2 channels, featuring an integrated 16-channel logic analyzer and a 25 MHz dual-channel function generator.
• MSO-2204EA: 200 MHz oscilloscope, 4 channels, featuring an integrated 16-channel logic analyzer and a 25 MHz dual-channel function generator.

Technical Advantages

• 100 MHz or 200 MHz bandwidth, with 2 or 4 channels depending on the model.
• The MSO-2000EA series combines a 16-channel logic analyzer with a dual-channel 25 MHz arbitrary waveform/function generator.
• Real-time sampling rate of 1 GSa/s per channel for 2-channel models; up to 1 GSa/s maximum for 4-channel models.
• Maximum memory depth of 10 Mpts with advanced VPO waveform display technology.
• Waveform update rate of up to 120'000 waveforms per second (wfm/s).
• 8-inch WVGA TFT LCD display for clear and detailed signal visualization.
• Free frequency response analysis software included.
• FFT up to 1 M points for high-resolution frequency-domain measurements.
• Integrated high-pass, low-pass, and band-pass filter functions.
• Up to 29,000 segmented memory records with advanced waveform search capability.
• Comprehensive serial bus triggering and decoding: I²C, SPI, UART, CAN, and LIN.
• Long-term data logging function, enabling signal monitoring for up to 100 hours.
• Network storage support for seamless integration into connected test environments.

Références :

GDM-9052 Dual Measurement Digital Multimeter, 5½ digits

Key Features

• 5½-Digit Display with a maximum count of 239,999
• 4.3" TFT Graphic LCD for clear and intuitive measurement visualization
• High DC Voltage Accuracy: up to 0.012% basic accuracy
• Automatic Intelligent Measurement (A.I.) automatically identifies and measures Voltage, Resistance, Diode, and Continuity without manual function selection
• 12 Measurement Functions, including:
  • AC/DC Voltage
  • AC/DC Current
  • 2-Wire / 4-Wire Resistance
  • Frequency
  • Period
  • Diode Test
  • Continuity Test
  • Capacitance
  • Temperature
• True RMS Measurements for AC and AC+DC signals
• Dual Measurement Function allowing two selected measurements to be displayed simultaneously
• Advanced Math Functions: Max/Min, REL/REL#, Compare, Hold, dB, dBm, MX+B, %, and 1/X
• Digital I/O Interface with dual operating modes: Standard Compare and User-Defined
• Standard Communication Interfaces: RS-232C and USB Device (supporting USBCDC and USBTMC modes)

Ordering Information

• GDM-9042/GPIB – 50'000-count dual-measurement multimeter with USB Host/Device and optional GPIB interface
• GDM-9042 – 50'000-count dual-measurement multimeter with USB Host/Device
• GDM-9041 – 50'000-count dual-measurement multimeter with USB Device

The GW Instek GDM-9040 Series Dual Measurement Digital Multimeters are high-performance digital multimeters designed for laboratory, industrial, and educational applications. Manufactured by GW Instek, the series combines precision measurement, intuitive operation, and advanced connectivity features.

Equipped with a 4.3-inch TFT graphic LCD and a 50,000-count resolution, the GDM-9040 series provides clear data visualization and reliable measurement performance.

Key Features

• 50,000-count resolution
• 4.3" TFT graphic LCD display
• DC voltage basic accuracy: up to 0.02%
• Automatic Identification (A.I.) Measurement automatically detects and measures:
  • Voltage
  • Resistance
  • Diode
  • Continuity
    without requiring manual function selection
• 11 measurement functions, including:
  • DC Voltage (DCV)
  • AC Voltage (ACV)
  • DC Current (DCI)
  • AC Current (ACI)
  • 2-wire Resistance
  • Frequency
  • Period
  • Diode Test
  • Continuity Test
  • Capacitance
  • Temperature
• True RMS measurements for AC and AC+DC signals
• Dual measurement display, allowing two selected parameters to be measured simultaneously
• Advanced mathematical functions:
  Max/Min, REL, MX+B, 1/X, Ref%, Compare, Hold, dB, and dBm
• Standard interface: USB Device supporting USBCDC and USBTMC communication modes
• Temperature measurement function (GDM-9042 model only)
• USB storage for data collection (GDM-9042 model only)

DAQ-9600 Data Acquisition System

The DAQ-9600 Data Acquisition System is a versatile and high-performance solution designed for automated testing, measurement, and data logging in laboratory and industrial environments. With its modular architecture, integrated precision DMM, and multiple connectivity options, it provides a reliable platform for a wide range of measurement applications.

Ordering Information

Mainframes

Modules

Key Features

• Large 4.3-inch TFT color display for clear and intuitive measurement visualization
• 3-slot mainframe with an integrated 6½-digit digital multimeter (DMM)
• High measurement accuracy with 0.0035% basic DC voltage accuracy
• Compatibility with 7 interchangeable switch modules for flexible configuration
• Voltage measurement capability up to 600 V DC / 400 V AC (with DAQ-909 module)
• High scanning speed up to 450 channels per second
• Internal memory capable of storing up to 100,000 data points

Measurement Capabilities

The DAQ-9600 supports measurement and conversion of 14 different input signal types, including:

• Temperature measurement using thermocouples, RTDs, and thermistors
• DC and AC voltage
• 2-wire and 4-wire resistance
• Frequency and period
• DC and AC current
• Capacitance measurement
• Direct strain and bridge strain measurements

Connectivity and Integration

• Command compatibility with the DAQ970A, enabling easy integration with existing test systems
• USB storage support for data logging and file transfer in standalone operation
• Multiple interfaces including Digital I/O, LAN, USB host/device, and optional mini-GPIB

Software

The DAQ-Data Logger PC software, provided free of charge, allows users to easily configure measurement setups, monitor data in real time, and control test procedures from a computer.

Ordering Information

• GVM-9102 – 2 kV DC Voltmeter

The GVM-9102 is a high-precision 2 kV DC voltmeter designed for accurate, high-speed measurements. Key features include:

• 6½-Digit Display – Maximum resolution of 2'399'999 points for ultra-precise readings.
• 4.3-inch TFT Graphic LCD – Provides clear visualization of measurements.
• High Voltage Measurement – Measures DC voltages up to 2'400 V.
• Exceptional Accuracy – DC voltage basic accuracy of 0.01%.
• Fast Sampling – Up to 10,000 readings per second, ideal for dynamic measurements.
• USB Storage – Save measurement data directly to an external USB drive.
• Advanced Graphic Display – Supports histograms, bar meters, and trend charts for intuitive data analysis.
• Connectivity – Standard interfaces include Digital I/O, RS-232C, USB Host/Device, and LAN. Optional GPIB interface available for integration into automated systems.

Designed for laboratory, production, and high-voltage testing environments, the GVM-9102 combines speed, precision, and versatility in a compact, user-friendly package.

Ordering Information

• GDM-9060 – 6½ Digit Dual-Measurement Digital Multimeter, 0,0075%
• GDM-9061 – 6½ Digit Dual-Measurement Digital Multimeter, 0,0035%

The GDM-906X Series is a high-precision digital multimeter designed for advanced measurement applications in laboratories, research environments, and production testing. With its high resolution, versatile measurement capabilities, and graphical display functions, it provides reliable and efficient electrical measurements for demanding professional use.

Key Features

• 6½-digit display with 1'200'000 counts for high-resolution measurements
• 4.3-inch TFT graphical LCD for clear data visualization
• DC voltage basic accuracy:
  • 0.0035% (GDM-9061)
  • 0.0075% (GDM-9060)
• 12 measurement functions:
  DC Voltage (DCV), AC Voltage (ACV), DC Current (DCI), AC Current (ACI), 2-wire and 4-wire Resistance, Frequency, Period, Diode Test, Continuity Test, Temperature, and Capacitance
• Sampling rate up to 10 kS/s (GDM-9061) for fast data acquisition
• Dual-measurement capability, allowing two selected measurements to be displayed simultaneously
• Graphical analysis tools, including histogram, bar meter, and trend display
• Temperature measurement support for RTD, thermistors, and thermocouples
• Standard interfaces: USB Host/Device, RS-232C, LAN, and Digital I/O
• Optional interface: GPIB

Key Features by Model

GDM-541

• 22'000 counts, auto/manual ranging
• 46-segment analog bar graph
• AC Voltage measurement up to 1000 V
• AC + DC Voltage measurement
• Current measurement up to 20 A
• Transistor (hFE) measurement
• Audible/Visual overload alarm
• True RMS / USB interface

GDM-533

• 6'000 counts, auto/manual ranging
• 31-segment analog bar graph
• LoZ AC Voltage measurement
• AC Voltage measurement up to 1000 V
• Current measurement up to 20 A
• Temperature measurement
• Audible/Visual overload alarm
• True RMS / USB interface 

GDM-532

• 9'999 counts, auto/manual ranging
• Backlit display / Auto power-off
• Continuity beeper / Diode test
• Temperature measurement
• Non-Contact Voltage (NCV) detection
• Data hold and relative mode

GDM-531

• 6'000 counts, manual ranging
• Backlit display / Auto power-off
• Capacitance measurement
• Non-Contact Voltage (NCV) detection
• Data hold
• Audible/Visual overload alarm

References

• GSC-2060G : RF Signal Generator, 9 kHz ~ 6 GHz, GPIB
• GSC-2060GA : RF Signal Generator, 9 kHz ~ 6 GHz, GPIB, OCXO
• GSC-2160G : RF Signal Generator, 9 kHz ~ 6 GHz, IQ Modulation, GPIB
• GSC-2160GA : RF Signal Generator, 9 kHz ~ 6 GHz, IQ Modulation, GPIB, OCXO

Key Features

The GSG-2000 Series RF Signal Generator delivers high spectral purity, advanced modulation capabilities, and outstanding frequency stability, making it suitable for R&D, production testing, and advanced communication system verification.

Frequency Performance

• Frequency Range: 9 kHz to 6 GHz
• Frequency Resolution: 1 mHz
• Standard Frequency Stability: 10 ppm
• Aging Rate: 2 ppm
• Optional AUX (OCXO):
  • Frequency Stability: 10 ppb
  • Aging Rate: 0.1 ppm

Amplitude Performance

• Amplitude Range: –140 dBm to +20 dBm
• Amplitude Resolution: 0.01 dBm
• Amplitude Units: dBm, dBµV, Vrms
• Phase Noise: < –117 dBc/Hz (typical) @ 1 GHz output, 20 kHz offset
• Frequency/Amplitude Switching Speed: ≤ 5 ms

Modulation Capabilities

• Built-in AM, FM, and PM analog modulation
• Built-in LF/RF signal output and pulse signal output
• Digital modulation (I/Q) sampling rate up to 180 MSa/s
• Up to 60 MHz baseband I or Q modulation bandwidth
• Up to 120 MHz RF I+Q modulation bandwidth
• Supports ASK, PSK, APSK, QAM, FSK, MSK, and user-defined IQ/FSK digital modulation
• IQ modulation output supported on GSG-2160 model only

Connectivity

• Interfaces: USB, LAN, and optional GPIB
• Remote control commands compliant with SCPI standards

The GSG-2000 Series provides a comprehensive and scalable RF signal generation platform for modern communication technologies and high-performance RF applications.

References

• AFG-4225E : Dual channel, 25 MHz, 125 Mé/s, 14 bits, USB
• AFG-4235 : Dual channel, 35 MHz, 500 Mé/s, 16 bits, USB, LAN
• AFG-4260 : Dual channel, 60 MHz, 500 Mé/s, 16 bits, USB, LAN
• AFG-4280 : Dual channel, 80 MHz, 500 Mé/s, 16 bits, USB, LAN
• AFG-4210H : Dual channel, 100 MHz, 500 Mé/s, 16 bits, USB, LAN

The AFG-4000 Series Arbitrary Function Generators deliver high-performance waveform generation with flexible channel configurations, advanced modulation capabilities, and high sampling rates. The series is designed for education, R&D, production testing, and electronic system validation.

Channel Configuration

• Single Channel Models:
  • AFG-4125E / AFG-4125AE (25 MHz)
• Dual Channel Models:
  • AFG-4225E (25 MHz)
  • AFG-4235 (35 MHz)
  • AFG-4260 (60 MHz)
  • AFG-4280 (80 MHz)
  • AFG-4210H (100 MHz)
  • AFG-4225H (250 MHz)

Waveform Capabilities

• Built-in waveforms: Sine, Square, Triangle, Ramp, Pulse, Noise, Harmonic, and Arbitrary
• Minimum frequency resolution: 1 µHz

Arbitrary Waveform Performance

Sampling Rate:

• AFG-4225H: 1.25 GSa/s
• AFG-4235 / 4260 / 4280 / 4210H: 500 MSa/s
• AFG-4125E / 4125AE / 4225E: 125 MSa/s

Vertical Resolution:

• AFG-4125E / 4125AE / 4225E: 14-bit
• AFG-4235 / 4260 / 4280 / 4210H / 4225H: 16-bit

Memory Depth:

• AFG-4225E / 4235 / 4260 / 4280 / 4210H / 4225H: 10 Mpts per channel
• AFG-4125E / 4125AE: 16 kpts per channel

Modulation & Functions

Supports a wide range of modulation types:

• AM, DSB-AM, FM, PM, PWM
• ASK, PSK, BPSK, QPSK
• FSK, 3FSK, 4FSK, OSK
• SUM modulation

Additional built-in functions:

• Sweep
• Burst
• Frequency Counter

AFG-4125AE includes a built-in power amplifier function.

Interface & Display

• USB Interface: AFG-4125E / 4125AE / 4225E
• USB & LAN Interfaces: AFG-4235 / 4260 / 4280 / 4210H / 4225H

Display:

• 8-inch TFT LCD, 800 × 480 resolution
• Multi-touch display (AFG-4235 / 4260 / 4280 / 4210H / 4225H)

The AFG-4000 Series combines precision, flexibility, and user-friendly operation, making it suitable for demanding waveform generation applications.

References

• GBM-3080 Battery Meter, 80 V
• GBM-3300 Battery Meter, 300 V
• GBM-3100H Battery Meter, 1000 V

Key Features

• 3.5" TFT LCD (320x240)
• Measurement: DC voltage and AC resistance
• Voltage ranges: 80V (GBM-3080), 300V (GBM-3300), 1000V (GBM-3100H)
• Resistance measurement: 0 mΩ to 3.2 kΩ
• Basic accuracy: ±0.01% for voltage, ±0.5% for resistance
• Measurement resolution up to 0.1 μΩ and 10 μV, suitable for single-cell testing
• Independent GO/NOGO function for voltage and resistance
• Probe disconnection/contact detection for reliable measurements
• Standard interfaces: USB host/device, RS-232C, and Handler

References

• GOM-804 : Milliohmètres DC+/Standby
• GOM-804G : Milliohmètres DC+/Standby, GPIB
• GOM-805 : Milliohmètres DC+/DC-/Pulsed/PWM/Zero/Standby

Reference

• GPM- 8213 : Digital Power Meter

Key Features

• 4” TFT LCD
• Two display modes: Standard and Simple
• Standard: 2 major + 6 secondary measurements
• Simple: 4 measurement parameters
• Accepted for SPEC Power® testing
• Compliant with IEC 62301 power measurement
• Voltage/current test frequency bandwidth: DC ~ 6 kHz
• Watt resolution: 1 mW
• Minimum current range: 5 mA, resolution 0.1 µA
• Current/voltage measurements: CF=3 (distorted wave), CF=6 (half range)
• Integration W-h / A-h function
• Total harmonic distortion measurement
• Front panel test terminals
• Standard interfaces: RS-232C, USB Device, LAN
• Optional interface: GPIB
• Optional test fixture: GPM-001

Reference

• GPM-8310 : Wattmètre numérique

Key Features

• 5” TFT LCD
• Voltage/current test bandwidth: DC, 0.1 Hz ~ 100 kHz
• Two numeric display modes: General (2 main + 8 secondary), Simple (4 main)
• Waveform display: V (voltage), I (current), P (power)
• CF for distorted waveform: 3, half-range CF: 6 or 6A
• Accepted for SPEC Power® testing
• Harmonic measurement up to 50th order, numeric and bar graph
• Integration function with automatic level-changing
• External current sensor inputs (EXT1/EXT2)
• Standard interfaces: RS-232C, USB Device / Host, LAN, GPIB
• Optional interface: Digital I/O (DA4, factory-installed)

References

• GPM-8320 : Digital Power Meter, two measurement modules
• GPM-8320G : Digital Power Meter, two measurement modules
• GPM-8330 : Digital Power Meter, three measurement modules
• GPM-8330G : Digital Power Meter, three measurement modules

Overview

The GPM-8330 and GPM-8320 Digital Power Meters are high-precision instruments designed for accurate electrical power measurement and analysis. Equipped with a 5-inch TFT LCD display, these devices provide a wide measurement bandwidth for voltage and current. They allow detailed waveform visualization, harmonic analysis, and comprehensive power measurements in compliance with international standards.

Key Features

• 5-inch TFT LCD color display
• Voltage and current measurement bandwidth: DC, 0.1 Hz to 100 kHz
• Waveform display for Voltage (V), Current (I), and Power (P)
• Distorted waveform measurement capability:
  • Full range for CF = 3
  • Half range for CF = 6 (or 6 A)
• Compliant with IEC 61000-4-7 harmonic measurement standard (50/60 Hz)
• Selectable wiring configurations: 1P3W, 3P3W, 3P4W, 3V3A
• Harmonic measurement and analysis up to the 50th order
• Auto-ranging function for integration mode
• Screen capture via USB Host
• External current sensor input support (EXT1 / EXT2)

Interfaces

Standard Interfaces:

• RS-232C
• USB Device / USB Host
• LAN

Optional Interface:

• GPM-DA12 – GPIB + Digital I/O interface (factory installed only)

References

• GPM-8320-60 : Digital Power Meter 60A, two measurement modules
• GPM-8320-60G : Digital Power Meter 60A, two measurement modules, GPIB, DA12
• GPM-8330-60 : Digital Power Meter 60A, three measurement modules
• GPM-8330-60G : Digital Power Meter 60A, three measurement modulesGPIB, DA12

Key Features

• 5” TFT LCD display
• Voltage/Current test bandwidth: DC, 0.1 Hz to 100 kHz
• Direct input current up to 60 A
• Waveform display: Voltage (V), Current (I), Power (P)
• Distorted current/voltage measurement: full range CF=3, half range CF=6 (or 6 A)
• Compliant with IEC 61000-4-7 harmonic measurement (50 Hz / 60 Hz)
• Wiring selection button: 1P3W, 3P3W, 3P4W, 3V3A
• Harmonic measurement & analysis up to 50 orders
• Auto-ranging function for Integration mode
• Screen capture via USB host
• External current sensor inputs (EXT1/EXT2)

Reference

• GVT-417B : High-Precision AC Millivolt Meter

Capture even the smallest voltages with outstanding accuracy! The GVT-417B is built for professionals who demand reliability and performance in every measurement.

Why Choose the GVT-417B?

• Maximum Sensitivity: Detect voltages as low as 300 μV full-scale.
• Wide Measurement Range: 10 Hz to 1 MHz for any application.
• Flexible Amplitude: -70 dB to +40 dB across 12 easy-to-select ranges.
• Dual Channels (GVT-427B): Measure simultaneously or independently.
• CE Certified: Safety and compliance guaranteed.

References

• LCR-1010 – 10 kHz Handheld LCR Meter
• LCR-1100 – 100 kHz Handheld LCR Meter

Key Features

• 2.8” TFT Touch LCD
• 50,000 counts resolution on both primary and secondary displays
• 0.2% basic accuracy
• 6 or 8 selectable test frequencies depending on the model
• 15 measurement combinations available
• Selectable test levels:
  • AC: 0.3 V / 0.7 V / 1 Vrms
  • DC: ±1 V
• Selectable measurement speeds:
  • Fast: 10 measurements per second
  • Slow: 2.5 measurements per second
• Auto LCR Mode for automatic component identification
• Data Hold function
• USB interface (Virtual COM) for remote communication
• Datalogging software available

References

• LCR-6002 : Precision LCR Meter, 10 Hz to 2 kHz
• LCR-6020 : Precision LCR Meter, 10 Hz to 20 kHz
• LCR-6100 : Precision LCR Meter, 10 Hz to 100 kHz
• LCR-6200 : Precision LCR Meter, 10 Hz to 200 kHz
• LCR-6300 : Precision LCR Meter, 10 Hz to 300 kHz

Key Features

• 3.5” color LCD display
• 5 models available (2 kHz / 20 kHz / 100 kHz / 200 kHz / 300 kHz)
• Consecutive and adjustable test frequency
• Basic accuracy up to 0.05%
• Measurement speed up to 25 ms (max.)
• OPEN/SHORT compensation across full frequency range or spot frequency
• 16 primary/secondary parameter combinations plus two monitoring parameters (up to four parameters displayed simultaneously)
• DCR measurement and internal DC bias voltage (±2.5 V)
• PASS / FAIL judgment function
• Auto Level Control (ALC)
• BIN sorting function: 9 BIN + 1 AUX (total 10 BIN)
• 10-step list testing with selectable frequency, voltage, and current conditions
• Standard interfaces: RS-232C, Handler, and USB Host / Device
• Compact design suitable for automated systems (2U, 1/2 rack)

References

• LCR-8250A : DC, 10 Hz ~ 50 MHz High Frequency LCR Meter
• LCR-8230A : DC, 10 Hz ~ 30 MHz High Frequency LCR Meter
• LCR-8220A : DC, 10 Hz ~ 20 MHz High Frequency LCR Meter
• LCR-8210A : DC, 10 Hz ~ 10 MHz High Frequency LCR Meter
• LCR-8205A : DC, 10 Hz ~ 5 MHz High Frequency LCR Meter

• LCR-8230 : DC, 10 Hz ~ 30 MHz High Frequency LCR Meter
• LCR-8220 : DC, 10 Hz ~ 20 MHz High Frequency LCR Meter
• LCR-8210 : DC, 10 Hz ~ 10 MHz High Frequency LCR Meter
• LCR-8205 : DC, 10 Hz ~ 5 MHz High Frequency LCR Meter
• LCR-8201 : DC, 10 Hz ~ 1 MHz High Frequency LCR Meter

Key Features

• Wide test frequency range :
  • LCR-8200A : DC, 10 Hz ~ 50 / 30 / 20 / 10 / 5 MHz
  • LCR-8200 : DC, 10 Hz ~ 30 / 20 / 10 / 5 / 1 MHz
• 7-inch color LCD display
• 0.08% basic accuracy
• Simultaneous display of up to 4 measurement results from 17 selectable parameters
• 15-step LIST measurement mode
• Dual-curve sweep mode
• Equivalent circuit model analysis (LCR-8200A only)
• Internal DC bias voltage ±12 V
• USB storage support
• Auto Level Control (ALC) function
• Standard interfaces : RS-232C, USB Host / Device, LAN, GPIB and Handler
• Universal power input

References

• PCS-1000i : Isolated Output High Precision Current Shunt Meter

Key Features

• 6½-digit resolution for voltage and current measurements
• Simultaneous voltage and current measurement
• Five current measurement levels (AC/DC): 30 mA / 300 mA / 3 A / 30 A / 300 A
• AC voltage measurement levels: 200 mV / 2 V / 20 V / 200 V / 600 V
• DC voltage measurement levels: 200 mV / 2 V / 20 V / 200 V / 1000 V
• Standard interfaces: USB & GPIB
• CE certified

References

• GPT-9503 – AC 150 VA Multi-Channel Hipot Tester, H or X Channel Status
• GPT-9513 – AC 150 VA Multi-Channel Hipot Tester, H, L or X Channel Status

Key Features

• 150 VA AC test capacity
• 3-in-1 tester: AC Hipot, DC Hipot, and Insulation Resistance
• Built-in 8-channel scanner
• 4.3" color TFT LCD (480 × 272 resolution)
• Test parameter import/export via USB host
• Statistical counter function
• Insulation resistance measurement up to 10 GΩ
• Open/Short Check (OSC)
• Arc detection
• Multi-language interface: English, Traditional Chinese, Simplified Chinese
• Communication interfaces: RS-232C and USB host/device

References

• GPT-9601: AC 100 VA Withstanding Voltage Safety Tester
• GPT-9602: AC/DC 100 VA Withstanding Voltage SafetyTester
• GPT-9612: AC 100 VA Withstanding Voltage / Insulation Resistance SafetyTester
• GPT-9603: AC/DC 100 VA Withstanding Voltage / Insulation Resistance SafetyTester

Key Features

• 100VA AC test capacity
• 240x48 Ice Blue dot matrix LCD
• Auto W-I or I-W mode
• ARC detection
• RMS current measurement
• Zero-crossing turn-on operation
• INTERLOCK safety function
• PWM amplifier for enhanced power efficiency and reliable testing
• Automatic input source switching for universal voltage
• Interface: remote terminal and Signal I/O ports

References

• GPT-9801: 200VA AC Withstanding Voltage Tester
• GPT-9802: 200VA AC/DC Withstanding Voltage Tester
• GPT-9803: 200VA AC/DC & Insulation Resistance Tester
• GPT-9804: 200VA AC/DC, Insulation Resistance & Ground Bond Tester

• GPT-9901A: 500VA AC Withstanding Voltage Tester
• GPT-9902A: 500VA AC/DC Withstanding Voltage Tester
• GPT-9903A: 500VA AC/DC & Insulation Resistance Tester
• GPT-9904: 500VA AC/DC, Insulation Resistance & Ground Bond Tester

Features

• AC Test Capacity: 200 VA and 500 VA
• 240x64 Ice Blue Dot Matrix LCD
• Manual and Auto Modes
• Function Key for Quick Selection
• High-Intensity Flash for Caution & Status Indication
• Safety INTERLOCK Function
• Zero-Crossing Turn-on Operation
• Controllable Ramp-Up Time
• RMS Current Measurement
• High Resolution: 1 µA for current, 2 V for voltage
• PWM Amplifier for improved power efficiency and reliable testing
• Up to 100 memory blocks for test conditions; each step individually nameable
• Front-panel remote terminal for Start/Stop control
• Interfaces: RS-232C, USB, Signal I/O, and optional GPIB

References

• GPT-12001: AC 200 VA Electrical Safety Analyzer
• GPT-12002: AC/DC 200 VA Electrical Safety Analyzer
• GPT-12003: AC/DC/IR 200 VA Electrical Safety Analyzer
• GPT-12004: AC/DC/IR/GB 200 VA Electrical Safety Analyzer

• GPT-15001: AC 500 VA Electrical Safety Analyzer
• GPT-15002: AC/DC 500 VA Electrical Safety Analyzer
• GPT-15003: AC/DC/IR 500 VA Electrical Safety Analyzer
• GPT-15004: AC/DC/IR/GB 500 VA Electrical Safety Analyzer

• GPT-15012: DC 12kV / IR 5kV Electrical Safety Analyzer

Main Features

• GPT-12000 Series : AC Test Capacity: 200 VA
• GPT-15000 Series : AC Test Capacity: 500 VA
• GPT-15012 : DC 12kV / IR 5kV
• Compliant with IEC 61010-2-034
• 7” TFT LCD Display
• Manual and Automatic Modes
• RMS Current Measurement
• Zero Crossing Turn-on Function
• Controllable Ramp-up and Ramp-down Time
• Capacitive Load Testing up to 47 μF
• Statistics and Analysis Function
• Sweep Function for DUT Characteristic Analysis
• Convenient AUTO mode for easy result reading
• Internal and USB Storage
• Barcode Function Available
• Export/Import of Test Settings
• Rear Panel Output Available
• Interfaces: RS-232C, USB host/device, Signal I/O, optional GPIB or LAN
• Universal Power Input

References

• MFG-2110 – 10 MHz single-channel arbitrary function generator with pulse generator.
• MFG-2120 – 20 MHz single-channel arbitrary function generator with pulse generator.
• MFG-2120MA – 20 MHz single-channel arbitrary function generator with pulse generator, modulation, and power amplifier.
• MFG-2130M – 30 MHz single-channel arbitrary function generator with pulse generator and modulation.
• MFG-2160MF – 60 MHz single-channel arbitrary function generator with pulse generator, modulation, and 160 MHz RF signal generator.
• MFG-2160MR – 60 MHz single-channel arbitrary function generator with pulse generator, modulation, and 320 MHz RF signal generator.

• MFG-2230M – 30 MHz dual-channel arbitrary function generator with pulse generator and modulation.
• MFG-2260M – 60 MHz dual-channel arbitrary function generator with pulse generator and modulation.
• MFG-2260MFA – 60 MHz dual-channel arbitrary function generator with pulse generator, modulation, 160 MHz RF signal generator, and power amplifier.
• MFG-2260MRA – 60 MHz dual-channel arbitrary function generator with pulse generator, modulation, 320 MHz RF signal generator, and power amplifier.
• MFG-2220HM – 200 MHz dual-channel arbitrary function generator with pulse generator and modulation.

MFG-2000 Series Multi-Channel Function Generator

The MFG-2000 Series is a range of high-performance multi-channel arbitrary function generators designed for testing, measurement, and electronic development applications. These instruments provide excellent signal quality, advanced modulation capabilities, and flexible output configurations suitable for laboratory and industrial environments.

Key Features

• Up to five output channels available.
• Two high-performance arbitrary waveform channels with frequency ranges from 1 µHz to 10 / 20 / 30 / 60 / 200 MHz depending on the model.
• RF channel (FG/ARB/MOD) with frequency up to 160 MHz or 320 MHz.
• Pulse generator with a maximum frequency of 25 MHz.
• Low-frequency power amplifier (up to 100 kHz) with 20 W output power.
• True point-by-point arbitrary waveform generation:
  • MFG-2220HM: 250 MSa/s sampling rate with 125 MHz repetition rate.
  • Other models: 200 MSa/s sampling rate with 100 MHz repetition rate.
• 14-bit resolution with 16k points memory depth.
• Earth ground isolation between I/O terminals and the instrument chassis (except MFG-2220HM).
• Built-in frequency counter up to 150 MHz with 8-digit frequency resolution.
• Supported modulation types: AM, FM, PM, ASK, FSK, PSK, SUM, and PWM.
• Built-in medical and automotive electronic waveforms (except MFG-2220HM).
• Communication interfaces: USB Host, USB Device, and LAN (MFG-22XX models only).

Références

• GCP-300 : Current probe, 400 A, DC à 300 kHz
• GCP-500 : Current probe, 200 A, DC à 500 kHz
• GCP-1000 : Current probe, 70 A, DC à 1 MHz

References

• AFG-2005 : Arbitrary Function Generator, 0,1 Hz à 5 MHz
• AFG-2105 : Arbitrary Function Generator, 0,1 Hz à 5 MHz, with modulation, sweep, and counter
• AFG-2012 : Arbitrary Function Generator, 0,1 Hz à 12 MHz
• AFG-2112 : Arbitrary Function Generator, 0,1 Hz à 12 MHz, with modulation, sweep, and counter
• AFG-2025 : Arbitrary Function Generator, 0,1 Hz à 25 MHz
• AFG-2125 : Arbitrary Function Generator, 0,1 Hz à 25 MHz, with modulation, sweep, and counter

Overview

The AFG-2100 / AFG-2000 Series is a range of DDS (Direct Digital Synthesis) based arbitrary function generators designed to meet the needs of educational and industrial environments. It provides a precise, stable, and cost-effective signal source capable of generating sine, square, triangle, noise, and arbitrary waveforms.

With a frequency range from 0.1 Hz up to 5 / 12 / 25 MHz, 0.1 Hz resolution, 20 MSa/s sampling rate, 10-bit vertical resolution, and 4k-point waveform memory, the series offers high flexibility for custom waveform generation.

Key Features

• Frequency range: 0.1 Hz to 5 / 12 / 25 MHz
• Frequency resolution: 0.1 Hz
• Waveforms: Sine, Square, Triangle, Noise, Arbitrary
• Sampling rate: 20 MSa/s
• Vertical resolution: 10-bit
• Waveform memory: 4k points
• Adjustable duty cycle: 1% to 99% (square wave)
• Adjustable symmetry: 0% to 100% (ramp)
• 3.5-inch LCD display
• USB interface for remote control
• PC waveform editing software

Advanced Features (AFG-2100 Series Only)

• AM / FM / FSK modulation
• Sweep function
• Built-in frequency counter up to 150 MHz

Applications

• Education and training
• Analog and digital circuit testing
• Signal simulation and prototyping
• Audio and RF testing
• Automated test systems (ATE)

References

• SFG-1003 : Function Generator, 0,1 Hz to 3 MHz
• SFG-1013 : Function Generator, 0,1 Hz to 3 MHz, dual display

Overview

This DDS (Direct Digital Synthesis) based function generator provides a reliable, accurate, and cost-effective solution for signal generation in educational, laboratory, and industrial environments. Built on an advanced FPGA architecture, it ensures high stability and precision while maintaining ease of use.

With a frequency range from 0.1 Hz to 3 MHz and fine resolution, this device is ideal for applications requiring accurate signal generation without unnecessary complexity.

Key Features

• DDS technology with FPGA design
• Frequency range: 0.1 Hz to 3 MHz
• Frequency resolution: 100 mHz
• Frequency accuracy: ± 20 ppm
• Frequency stability: ± 20 ppm
• Low distortion: -55 dBc (0.1 Hz to 200 kHz)
• Voltage display (SFG-1013)
• Multiple outputs: analog and TTL

Waveform Types

• Sine
• Square
• Triangle
• TTL output

Applications

• Automatic control training
• Vibration testing
• Electronic device testing and adjustment
• Circuit validation and troubleshooting
• Laboratory experiments

Key Advantages

• High signal stability and accuracy
• Low distortion for reliable measurements
• User-friendly interface
• Cost-effective solution
• Versatile for educational and technical use

Référence

• GSP-9330 : Spectrum Analyzer 9 kHz to 3,25 GHz

Key Features

• Frequency range: 9 kHz to 3.25 GHz
• High frequency stability of 0.025 ppm with 1 ppm aging rate
• Resolution bandwidth (RBW): 1 Hz to 1 MHz (3 dB)
• 6 dB EMI filters: 200 Hz, 9 kHz, 120 kHz, 1 MHz
• Ultra-fast sweep time: up to 204 µs
• Sensitivity: –149 dBm/Hz (with preamplifier enabled)
• Integrated preamplifier and 50 dB attenuator
• Sequence function for automated test routines
• Built-in EMC pre-compliance function with Quasi-Peak and Average EMI detection modes
• Integrated 2FSK analysis and AM/FM/ASK/FSK demodulation and analysis
• Advanced measurement capabilities including:
  P1dB, Harmonics, Channel Power (CHPW), Occupied Channel Bandwidth (OCBW),
  Adjacent Channel Power Ratio (ACPR), Spectrum Emission Mask (SEM),
  Third-Order Intercept (TOI), Carrier-to-Noise Ratio (CNR),
  Composite Triple Beat (CTB), Composite Second Order (CSO),
  N-dB bandwidth, Noise Marker, Frequency Counter,
  Time Domain Power (TDP), and Gated Sweep
• Multiple display modes: Spectrogram, Topographic, and Split-Window
• Remote EMI measurement software: SpectrumShot
• Remote control interfaces: LAN, USB, RS-232
• Optional accessories: Tracking Generator, GPIB interface

Applications

• Rapid verification and analysis of spectral characteristics
• EMI pre-compliance testing
• Analysis of ASK, FSK, AM, and FM signal characteristics
• Monitoring of satellite uplink signals from mobile uplink vehicles
• Ideal for systems requiring a compact and high-performance instrument
• Measurement of frequency response for cables, attenuators, filters, and amplifiers

Reference

• GSP-9300B : Spectrum Analyzer 9 kHz to 3 GHz

The GSP-9300B Spectrum Analyzer delivers high-precision measurement performance and advanced analysis capabilities, making it an ideal solution for RF testing, signal analysis, research laboratories, and production environments.

Key Features

• Frequency Range: 9 kHz to 3 GHz
• Frequency Stability: 0.025 ppm with 1 ppm annual aging rate
• Integrated Hardware: Built-in preamplifier, 50 dB attenuator, and sequence function
• Resolution Bandwidth (RBW): 1 Hz to 1 MHz
• Sensitivity: –149 dBm/Hz (with preamplifier enabled)
• Demodulation & Analysis: Integrated AM/FM demodulation and analysis functions
• Comprehensive Measurement Functions:
  P1dB point, harmonic analysis, channel power, N-dB bandwidth, occupied bandwidth (OCBW), adjacent channel power ratio (ACPR), spectrum emission mask (SEM), third-order intercept (TOI), carrier-to-noise ratio (CNR), composite triple beat (CTB), composite second order (CSO), noise marker, frequency counter, time-domain power, and gated sweep
• Display Modes: Spectrogram, topographic view, and dual-view display
• Remote Control Interfaces: LAN, USB, and RS-232
• Optional Accessories: Tracking generator and GPIB interface

The GSP-9300B combines precision, versatility, and ease of integration to meet the demanding requirements of modern RF applications.

Reference

• GSM-20H10 : Precision Source Measure Unit (SMU)

Key Features

• Maximum output: ±210 V / ±1.05 A / 22 W
• 4 built-in sequence output modes with up to 2500 points
• OVP (Over Voltage Protection) and OTP (Over Temperature Protection)
• 0.012% basic measurement accuracy with 6½-digit resolution
• Variable sampling speed
• SDM (Source Delay Measure) cycle
• 2-wire, 4-wire, and 6-wire remote voltage source and measurement sensing
• Adjustable display digits
• Built-in limit function
• 5 built-in calculation functions
• Standard SCPI command support
• Interfaces: RS-232, USBTMC, LAN, GPIB (optional)
• 4.3" TFT LCD display with numeric keypad
• Built-in RTC clock