- New
GDS-2000E Series - Oscilloscope 100/200 MHz, 2/4-channels
References :
GDS-2102E Oscilloscope 100 MHz, 2-channels
GDS-2104E Oscilloscope 100 MHz, 4-channels
GDS-2202E Oscilloscope 200 MHz, 2-channels
GDS-2204E Oscilloscope 200 MHz, 4-channels
Technical Advantages
- Bandwidth options of 100 MHz or 200 MHz, with 2 or 4 input channels depending on the model
- Real-time sampling rate up to 1 GSa/s
- 10 Mpts memory depth per channel, combined with advanced VPO (Visual Persistence Oscilloscope) waveform display technology
- High waveform update rate of up to 120'000 waveforms per second (wfms/s) for accurate capture of transient events
- 8-inch WVGA TFT LCD display, providing excellent readability and user comfort
- FFT analysis with up to 1 M points, enabling high-resolution frequency-domain measurements
- Built-in digital high-pass and low-pass filters for advanced signal processing
- Segmented memory with up to 29'000 segments, along with waveform search functions for efficient detection and analysis of rare events
- Advanced triggering and serial bus decoding capabilities, including I²C, SPI, UART, CAN, and LIN
- Data logging function allowing long-term signal monitoring for up to 100 hours
- Remote data storage via Internet, enabling easy access, sharing, and off-site analysis
The GDS-2000E Digital Storage Oscilloscope is designed to meet the demands of modern test and measurement applications, offering selectable bandwidths of 100 MHz and 200 MHz with two- or four-channel configurations.
The two-channel models provide a real-time sampling rate of 1 GSa/s per channel, while the four-channel models deliver a maximum real-time sampling rate of 1 GSa/s, ensuring accurate and reliable signal acquisition.
Featuring a large 8-inch TFT color LCD display (800 × 480 resolution) and a minimum vertical sensitivity of 1 mV/div, the GDS-2000E series enables precise measurement of weak and complex signals while delivering clear and detailed waveform visualization.
Advanced Memory and Signal Analysis
The GDS-2000E series is equipped with a memory depth of up to 10 Mpts, allowing users to capture, retrieve, and thoroughly analyze complete waveforms. Depending on application requirements, selectable memory depths of 1K, 10K, 100K, 1M, or 10M points are available.
- Short memory depth, combined with high sampling rates, is ideal for observing fast-changing and transient signals.
- Long memory depth enables detailed analysis of continuously varying signals over extended periods.
To maximize the efficiency of long memory utilization, the GDS-2000E integrates segmented memory and waveform search functions.
The segmented memory can be divided into up to 29'000 segments, allowing users to ignore non-relevant waveforms and quickly locate events of interest. This capability significantly enhances recording efficiency and accelerates target waveform identification.
The waveform search function further enables rapid detection of specific waveform events based on user-defined trigger conditions, greatly simplifying advanced signal analysis and troubleshooting tasks.
Standard Accessories
- User manual on CD-ROM
- Power cord
- GTP-100B-4: 100 MHz switchable passive probe (10:1 / 1:1) for GDS-2102E / GDS-2104E (one per channel)
- GTP-200B-4: 200 MHz switchable passive probe (10:1 / 1:1) for GDS-2202E / GDS-2204E (one per channel)
Optional Accessories
- GCP-0275 : Current probe DC to 2 MHz, 750 A
- GCP-0550 : Current probe DC to 5 MHz, 500 A
- GCP-2525 : Current probe DC to 25 MHz, 250 A
- GDP-100 : 100 MHz High Voltage Differential Probe
- GDP-050 : 50 MHz High Voltage Differential Probe
- GDP-025 : 25 MHz High Voltage Differential Probe
- GDB-03: Demonstration board
- GRA-426: Rack-mount adapter panel
- GAK-003: 50 Ω impedance adapter
- GSC-008: Soft carrying case
- GTL-246: USB 2.0 cable, Type A–B (1200 mm)
- GTL-110: BNC–BNC test cable
- GTP-033A: 35 MHz passive oscilloscope probe, 1:1, BNC (P/M)
GDS-2102E
Data sheet
- Bandwith
- 100 MHz
200 MHz - Max Sampling Rate (Real Time)
- 1 GSa/s
- Number of Channels
- 2
4 - Memory Depth
- 10 Mpts/channel
- Display
- 8"
- Update Rate
- 120'000 wfms/s
- Automatic Measurements
- 36
- Interfaces
- LAN
USB - Weight
- ~2,8 kg
Comments (0)
No customer reviews for the moment.
10 other products in the same category:
References :
GDS-2102E Oscilloscope 100 MHz, 2-channels
GDS-2104E Oscilloscope 100 MHz, 4-channels
GDS-2202E Oscilloscope 200 MHz, 2-channels
GDS-2204E Oscilloscope 200 MHz, 4-channels
Technical Advantages
- Bandwidth options of 100 MHz or 200 MHz, with 2 or 4 input channels depending on the model
- Real-time sampling rate up to 1 GSa/s
- 10 Mpts memory depth per channel, combined with advanced VPO (Visual Persistence Oscilloscope) waveform display technology
- High waveform update rate of up to 120'000 waveforms per second (wfms/s) for accurate capture of transient events
- 8-inch WVGA TFT LCD display, providing excellent readability and user comfort
- FFT analysis with up to 1 M points, enabling high-resolution frequency-domain measurements
- Built-in digital high-pass and low-pass filters for advanced signal processing
- Segmented memory with up to 29'000 segments, along with waveform search functions for efficient detection and analysis of rare events
- Advanced triggering and serial bus decoding capabilities, including I²C, SPI, UART, CAN, and LIN
- Data logging function allowing long-term signal monitoring for up to 100 hours
- Remote data storage via Internet, enabling easy access, sharing, and off-site analysis